Home || Export Import Policy & DGFT matters  || Customs matters || Central Excise matters || Shipping and Logistics Information
ieport.com - India's Premier portal on EXIM matters

DGFT PUBLIC NOTICE NO. 26 /2004-09 dated 23/11/2004
Amendments/additions/corrections in Standard Input output norms

 

          In exercise of the powers conferred under Paragraph 2.4 of the   Foreign Trade Policy, 2004-09 and Paragraph 1.1 of Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

 

2.       In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, (Vol.2) 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice are made.

 

3        In the statement of Standard Input Output Norms, following additions are made at appropriate places as mentioned below:-

 

CHEMICALS AND ALLIED PRODUCTS

 

          After the existing    entry    at    Sl.No.A-3421,  new  entries    at   Sl.   No. A-3422 to A-3470 are added as per Annexure  “B”  to this Public Notice.

 

 

 

 

 

ENGINEERING PRODUCTS

 

          After the existing entry at Sl.No.C-1994, new entries    at   Sl.  No. C-1995    to C-2006 are  added as per Annexure  “C”  to this Public Notice.

 

 

This issues in public interest.

     

 

        Sd/-

     ( K. T. CHACKO )

DIRECTOR GENERAL OF FOREIGN TRADE

 

 

 

  (S.B.S.REDDY)

Jt. DIRECTOR GENERAL OF FOREIGN TRADE

 

(F.No.01/87/171/00002/AM04/DES-VIII)

 

AMENDMENTS/CORRECTIONS

Sl. No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	38	Chemical & Allied Product Sl.No.A-175	The quantity of import item at Sl. 1(iii), is amended to read as under:- “2.45 kg/kg”
2.	38 – 39	Chemical & Allied Product Sl.No.A-176	The quantity of import item at Sl. 1(c), is amended to read as under:- “2.79 kg/kg”
3.	3	Chemical & Allied Product Sl.No.A-1030 (amended vide Public Notice No. 58 Dated:12.04.2004)	The description of import item at Sl. No. 1, the input word “Petroleum Coke” (without any other change) is amended to read as under:- “Raw Petroleum Coke”
4.	3	Chemical & Allied Product Sl.No.A-1050 (amended vide Public Notice No. 58 Dated:12.04.2004)	The description of import item at Sl. No. 1, the input word “Petroleum Coke” (without any other change) is amended to read as under:- “Raw Petroleum Coke”
5.	146	Chemical & Allied Product Sl.No.A1057	The norm covered by this entry is substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1057	Resin bonded Silicon Carbide Crucibles of various shapes & sizes	1 kg	1. Silicon Carbide	0.369Kg.
			2. Graphite	0.276Kg.
			3. Ferro silicon	0.115Kg.
			4. Aluminium Oxide	0.075Kg.
			5. Borax Anhydrous	0.033Kg.
			6. Ball Clay	0.015Kg.
			7. Hexamine	0.009Kg.
			8. Phenol Formaldehyde Resin of relevant specification	0.117Kg.
6.	175	Chemical & Allied Product Sl.No.A-1457	The norm covered by this entry is substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1457	Para Chloro Benzyl Chyanide (Para Chloro Phenyl Acetonitrile or 4 Chloro Benzyl Cyanide)	1 kg	1. Para Chlor Toluene OR	1.180 kg
			Para Chloro Benzyl Chloride	1.282 kg
			2. Sodium Cyanide	0.410 kg
			3. Azobis Iso Butyronitrile	0.005 kg
7.	4	Chemical & Allied Product Sl.No.A1944 (amended vide Public Notice No. 50 Dated:16.02.2004)	The quantity of import item at Sl. No. 1, is amended to read as under:- “1.45 kg/kg”
8.	290	Chemical & Allied Product Sl.No.A2268	The description of export item is amended to read as under:- “Geranyl Nitrile (Minimum Purity 94%)”
9.	307	Chemical & Allied Product Sl.No.A2397	The norm covered by this entry stands deleted.
10.	328	Chemical & Allied Product Sl.No.A2561	The quantity of import item at Sl. No.3, is amended to read as under:- “0.03 kg/kg”
11.	333	Chemical & Allied Product Sl.No.A2609	The description of import item at Sl. No.1, is amended along with quantity to read as under:-
			“1. Citric Acid Monohydrate OR	0.70 kg
			Citric Acid Anhydrous	0.64 kg”
12.	36	Chemical & Allied Product Sl.No.A3167 (amended vide Public Notice No.03 Dated:31/03/2003)	After the description of import item at Sl. No. 2, the following alternative import items (with quantity) is added:-
			“OR Di Methyl Carbonate	0.8 kg/kg”
13.	5	Chemical & Allied Product Sl.No.A3237 (amended vide Public Notice No.77 Dated:26/08/2004)	The description of export item, is amended to read as under:- “Flush Cyan for Printing Ink (40+/-1% Pigment and 34 +/-1% Solid Resin”
14.	19	Chemical & Allied Product Sl.No.A-3244 (amended vide Public Notice No. 27 Dated:06.10.2003)	After the description of import item at Sl. No. 4, the following alternative import items (with quantity) shall be added:-
			“OR 1. Pivalic Acid (97%Min)	1.15 kg
			2. Thionyl Chloride	1.00 kg
			3. Caustic Soda (100% Basis)	0.926 kg”
15.	16	Chemical & Allied Product Sl.No.A3313 (amended vide Public Notice No.58 Dated:12/04/2004)	The norm covered by this entry is substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3313	Para Chloro Benzyl Cyanide (Para Chloro Phenyl Acetonitrile OR 4 Chloro Benzyl Cyanide)	1 kg	1. Para Chloro Tolulene OR	1.180 Kg.
			Para Chloro Benzyl Chloride	1.282 Kg.
16.	1	Chemical & Allied Product Sl.Nos. (Notified vide Public Notice No.11 Dated:01.10.2004)	On page No. 1 of the said Public Notice, the numbering of the Standard Input Output Norms entries is corrected to read as under:- “After the existing entries at Sl. No. A3388, New Entries At. Sl. No. A-3389 to A-3421 are added as per Annexure “B” to this Public Notice”
17.	503 - 504	Engineering Product Sl.No.C171	The norm covered by this entry is substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C171	Complete Ceiling fan (56") with or without Metal Blades and regulator	1 No.	1. Super Enamelled Copper Wire/ Copper Rod	380 gm
			2. CRNGO Sheets/ Coils OR	3600 gm
			Electric Stamping made out of CRNGO Sheets	1500 gm
			3. Aluminium Alloy	1200 gm
			4. Kraft Paper	1000 gm
			5. Polypropylene	150 gm
			6. M.S. Sheet	250 gm
			7. Ball bearing/Bush	2 Nos.
			8. Capacitor	Net to net
			9. Aluminium Sheet/ CRCA Sheet/ Aluminium Alloy (for Blades and False Cover of Fan) (Only the relevant item used in the export to be allowed) [to be permitted only in such cases where Blades/False Cover are also required to be exported alongwith export product]	1.05 kg/ kg content in the export product.
			10. Regulator [to be allowed only in such cases where the same is required to be exported alongwith the export product]	1 No.
			11. MS/GI Pipe	1.02 Metre/ Metre content in export product
			12. MS Bright Bar	1.05 kg/kg content in the export product.
18.	15	Engineering Product Sl.No.C220 (amended vide Public Notice No.44 Dated:18/10/2002)	The description of import item at Sl. No. 1, (with quantity) is substituted to read as under:-
			“1. a) Angles of relevant grade of Steel OR	1.02 kg/kg content in export product
			Billets of relevant Grade of Steel	1.045 kg/kg content in export product
			b) Plates of relevant grade of Steel OR	1.05 kg/kg content in export product
			Slabs of relevant grade of Steel	1.075 kg/kg content in export product”
19.	16	Engineering Product Sl.No.C474 (amended vide Public Notice No.03 Dated:31/03/2003)	The norm covered by this entry is substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C474	Electrolytic Tin Plate	1 kg	1. Mild Steel Cold Rolled Wide Coil (Black Plate in Coil)	1.006 kgs
Note : This norm is made effective retrospectively from 06.11.2002.
20.	623	Engineering Product Sl.No.C565	The norm covered by this entry stands deleted.
21.	625 - 626	Engineering Product Sl.No.C593	The description of import item at Sl. No. 1 (with quantity) is amended to read as under:-
			“Non-Alloy HR Coils/Plates	1.05 MT/MT content in the export product”
22.	648	Engineering Product Sl.No.C755	The norm covered by this entry stands deleted.
23.	648	Engineering Product Sl.No.C756	The norm covered by this entry stands deleted.
24.	648	Engineering Product Sl.No.C757	The norm covered by this entry stands deleted.
25.	649	Engineering Product Sl.No.C758	The norm covered by this entry stands deleted.
26.	649	Engineering Product Sl.No.C759	The norm covered by this entry stands deleted.
27.	649	Engineering Product Sl.No.C760	The norm covered by this entry stands deleted.
28.	649	Engineering Product Sl.No.C761	The norm covered by this entry stands deleted.
29.	649	Engineering Product Sl.No.C762	The norm covered by this entry stands deleted.
30.	649	Engineering Product Sl.No.C763	The norm covered by this entry stands deleted.
31.	649	Engineering Product Sl.No.C764	The norm covered by this entry stands deleted.
32.	649	Engineering Product Sl.No.C765	The norm covered by this entry stands deleted.
33.	649	Engineering Product Sl.No.C766	The norm covered by this entry stands deleted.
34.	755	Engineering Product Sl.No.C1289	The description of import item at Sl. No. 1 (with quantity) is amended to read as under:-
			“Non-Alloy HR Coils/Plates	1.05 MT/MT content in the export product”
35.	755	Engineering Product Sl.No.C1290	The description of import item at Sl. No. 1 (with quantity) is amended to read as under:-
			“Non-Alloy HR Coils/Plates	1.05 MT/MT content in the export product”
36.	756	Engineering Product Sl.No.C1291	The description of import item at Sl. No. 1 (with quantity) is amended to read as under:-
			“Non-Alloy HR Coils/Plates	1.05 MT/MT content in the export product”
37.	756	Engineering Product Sl.No.C1292	The description of import item at Sl. No. 1 (with quantity) is amended to read as under:-
			“Non-Alloy HR Coils/Plates	1.05 MT/MT content in the export product”
38.	797	Engineering Product Sl.No.C1480	1. In the description of export item the word “Semi Automatic” stands deleted. 2. The quantity of import items at Sl. Nos. 16 & 17 is amended to read as under:- “16. 1.04 kg/kg content in export product” “17. 1.04 kg/kg content in export product” 3. After the description of import item at Sl. No. 17, the following additional inputs (with quantity) are added:-
			“18. Galvanized Precoated Steel Sheet	1.04 Kg./Kg content in export product
			19. High Impact Polystyrene	1.04 Kg./Kg content in export product
			20. Aluminium Ingots	1.04 Kg./Kg content in export product
			21. Styrene Acrylo Nitrile	1.04 Kg./Kg content in export product
			22. Polyethylene Resin	1.04 Kg./Kg content in export product
			23. Ethylene Vinyl Acetate	1.04 Kg./Kg content in export product
			24. Polyacetal GC25	1.04 Kg./Kg content in export product
			25. Polyester band	Net to net
			26. Nylon Cloth for Capicitor Cover	Net to net
			27. S.S. Sheet for flat spring	Net to net
			28. Relevant insulated Copper Wire 0.5 mm dia	1.01 metre/ metre content in export product
			29. Relevant grease	4 gms/machine
			30. Other relevant Components	As per General Note No. 4 of Engineering Group
39.	478	GENERAL NOTES FOR ENGINEERING PRODUCTS	After the general note at Sl. No. 6, the following general note is added:- “7. Unless and otherwise specifically mentioned, steel products wherever allowed for import, would be in prime condition only and not in seconds/ defective condition/form”
40.	888 - 891	Engineering Products Table No. 6	The quantity of import item in Column 1 B at Sl. No. 58 for “3 Core x 300 sq. mm” is corrected to read as under:- “2503.02 kg”
41.	1012	Plastics Product Sl.No.H-289	The description of import item at Sl. No. 6, (without any change in quantity) is amended to read as under:- “Impact Modifier for PVC”
42.	1094	Textile Product Sl.No.J-161	The norm covered by this entry is substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
J-161	Knitted Sweaters	1 kg	1. Relevant yarn (natural/ manmade)	1.15 kg./kg. content in the export product

 

Annexure “B” to the
Public Notice No. 26
Dated: 26/11/2004

 

CHEMICALS AND ALLIED PRODUCTS

 

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3422	Reactive Blue 3GRB (Dye content 92%)	1 kg	1. Acid Blue 40	0.820 kg
			2. Acrylic Acid	0.273 kg
A3423	Hydrotreating – cum – Desulphurisation catalyst Type : G-1 catalyst containing Zinc Oxide 85+/-3% and Molybdenum Trioxide 3.5+/-0.3%	1 kg	1. Zinc Metal	0.694 kg
			2. Molybdenum Trioxide	0.035 kg
A3424	Direct Yellow 118 (Direct Yellow HAR P/C) (Dye content 86%)	1 kg	1. Amido G Acid	0.638 kg
			2. Meta Toluidine	0.244 kg
			3. MAA Base (3-((4-Amino – 3 Methyoxy Phenyl)azo)- Benzene Sulphonic Acid)	0.190 kg
			4. Sodium Nitrite	0.147 kg
			5. Soda ash	0.792 kg
			6. Sodium Acetate	0.537 kg
			7. EDTA	0.020 kg
			8. Sulphamic Acid	0.008 kg
			9. PEG-400	0.013 kg
			10. Caustic Soda	0.260 kg
A3425	Direct Yellow 106 (Direct Yellow EFC LF/P/C) (Dye content 77%)	1 kg	1. 4 Nitro 4 Amino Stilbene-2, 2 Di-sulphonic Acid (NASDSA) OR	0.710 kg
			1(a)4,4 Dinitro Stilbene 2, 2 Disulphonic Acid (DNSDSA)	0.898 kg
			b) Soda Ash	0.275 kg
			c) Sodium Hydro Sulphide	0.513 kg
			2. Sodium Naphthionate	0.437 kg
			3. Sodium Nitrite	0.124 kg
			4. Soda Ash	0.142 kg
			5. Caustic Soda	0.605 kg
			6. Copper Sulphate	0.870 kg
			7. D-Glucose	0.477 kg
			8. Ammonia	0.633 kg
			9. Hyflo Supercel	0.034 kg
			10. Activated Carbon	0.027 kg
A3426	BIS – (3,5,5-Trimethyl Hexanoyl) Peroxide, 75% in Odourless Mineral Spirit	1 kg	1. Isononyl Chloride	0.896 kg
			2. Hydrogen Peroxide, 50%	0.190 kg
			3. Odourless Mineral Spirit	0.239 kg
A3427	Reactive Blue 221 (Reactive Blue BRX)	1 kg	1. Cyanuric Chloride	0.187 kg
			2. N-Ethyl Meta Base Ester	0.310 kg
A3428	1-Phenyloxindole	1 kg	1. Diphenylamine	1.20 kg/kg
			2. Toluene / IPA	3.11 kg/kg
			3. Chloroacetyl Chloride	0.81 kg/kg
			4. Aluminium Chloride	0.81 kg/kg
Note: Back ward integration may be allowed for import item No. 3 and 4 as per SION at Sl. A-1277 and A-2616 and A-1064 as per policy.
A3429	Diminazene Aceturate B-Vet. C-65	1 kg	1. Para Nitro Benzoic Acid	1.205 kg
			2. Dimethyl Formamide	0.54 kg
			3. Glycine	0.32 kg
A3430	2, 4 Dichloro Nitro Benzene	1 kg	1. Meta Dichloro Benzene	1.00 Kg.
A3431	2-Acetyl Thiophene	1 kg	1. Thiophene	0.741 Kg.
A3432	2, 4 D Iso Butyl Ester (Technical)	1 kg	1. Phenol	0.550 kg
			2. Monochloro Acetic Acid	0.466 kg
			3. Caustic Soda	0.391 kg
			4. Iso Butanol	0.290 kg
A3433	Napthol AS-LS 4-Chloro-3 Hydroxy-2 5-Dimethoxy-2-Naphthanilide C.I. No. 37555 Azoic Coupling component 23	1 kg	1. BON Acid.	0.552Kg
			2. 2:5 Dimethoxy 4 Chloro Aniline	0.527Kg
A3434	Aqueous solution of 3-Methoxy Propylamine, 40% w/w	1 kg	1. 3 Methoxy Propyl Amine	0.400 kg
A3435	Antioxidant containing mixed Tert-Butyl Phenols : 25% N,N di sec butyl -p-Phenylene Diamine :75%	1 kg	1. Mixed Tert-Butyl Phenols	0.25 kg
			2. N,N’ , Di-Sec-Butyl p-Phenylene – Diamine	0.75 kg
A3436	3-Bromo Thiophene	1 kg	1. Thiophene	0.86 Kg.
A3437	Direct Red 80 (Dye content 65%)	1 kg	1. J. Acid Urea	0.200 kg
A3438	Acid Violet 90 (cololan Bordeaux MB) (61% Dye content)	1 kg	1. Beta Nepthol	0.253 kg
			2. 1 Phenyl – Methyl 5 Pyrazolone	0.237 kg
			3. Sodium Nitrite	0.231 kg
			4. Twitchell oil	0.020 kg.
A3439	Sodium 2 Ethyl Hexonate	1 kg	1. 2-Ethyl Hexanoic Acid	0.870 kg
A3440	Acetyl Tributyl Citrate	1 kg	1. Citric Acid Mono Hydrate	0.645 kg
			2. N-butyl Alcohol	0.682 kg
			3. Acetyl Chloride	0.217 kg
A3441	Meta Chloro per Benzoic Acid (77% purity)	1 kg	1. 3 Chloro Benzoic Acid	0.760 Kg.
			2. Tertiary Butanol	3.5 Kg.
A3442	Flush Yellow for printing Ink (35+/-1% Pigment & 32+/-1% Solid Resin)	1 kg	1. Pigment Yellow-12	0.36Kg.
			2. Printing Ink Vehicle Plain (Solid content 61+/-2%) (Linseed Oil Base or Soyabean Oil base)	0.34Kg.
			3. Alkyd Resin, Namely, Soya long oil alkyd resin of 70% oil length having solid content 100% / Linseed oil based alkyd resin (Long oil length) having solid content 100%	0.12Kg.
			4. Petroleum Distillate (distillation range 240-330 Degree C)	0.13Kg.
			5. Oleyl Alcohol	0.03Kg.
			6. Antioxidant, namely, BH.T and MEHQ	0.01Kg.
			7. Texanol Isobutyrate	0.03Kg.
A3443	Pigment Alkali Blue Flush (Pigment content 40+/-2%, Solid Resin content 37+/-1%) Formaldehyde Route	1 kg	1. Aluminium Chelate	0.00600Kg.
			2. Aniline	1.33720Kg.
			3. Caustic Soda Flakes/ Lye on 100% basis	0.29920Kg.
			4. Dimer Fatty Acid	0.00201Kg.
			5. Dodecyl Phenol	0.00969Kg.
			6. Formaldehyde (37%)	0.14640Kg.
			7. Fumaric Acid	0.00502Kg.
			8. Iso Phthalic Acid	0.01304Kg.
			9. Maliec Anhydride	0.00100Kg.
			10. Para Octyl Phenol	0.01103Kg.
			11. Para Tertiary Butyl Phenol	0.00602Kg.
			12. Paraformaldehyde	0.01472Kg.
			13. Pentaerythritol	0.03580Kg.
			14. Petroleum Distillate (Distillation range 240-330 Degree Centigrade)	0.24120Kg.
			15. Rosin, namely, Gum Rosin/ Tall Oil Resin	0.2538Kg.
			16. Sodium Nitrate	0.23760Kg.
			17. Soyabean Oil	0.07691Kg.
			18. Vista Oil	0.00259Kg.
			19. Wetting Agent (Tauranol)	0.13200Kg.
A3444	Offset printing ink in Various colours other than Black, Cyan, Magenta and Yellow (Min. pigment content 14+/-1%) and Solid Resin 43+/-1%) (Flush Route)	1 kg	1. Flush in Various Colours for Printing Ink (35+/-1% Pigment & 32+/-1% Solid Resin)	0.4120Kg.
			2. Printing Ink Vehicle Gel (Solid content 59+/-1%) (Linseed Oil Base OR Soyabean Oil Base)	0.2575Kg
			3. Printing ink vehicle Plain (Solid Content 61+/-1%) Linseed Oil Base OR Soyabean Oil Base.	0.2575Kg.
			4. Polyethylene Wax Compound Containing 43+/-1% Polyethylene Wax, 29+/-1% Tung Oil and 28+/-1% Refined Linseed Oil	0.0310Kg.
			5. PTFE Wax compound containing 61+/-1% PTFE Wax and 33+/-1% Refined Linseed Oil.	0.0020Kg.
			6. Cobalt Magnesium combined Drier (Metal content 12+/-0.2%).	0.0103Kg.
			7. Petroleum Distillate (Distillation range 240-330 Degree C)	0.0591Kg.
A3445	Olefin Copolymer Viscosity Index Improver (Containing 85%+/-1% base oil and 15%+/- 1%) Ethylene Polypropylene Copolymer	1 kg	1. Base Oil (SN-150/150 N)	0.845 Kg.
			2. Ethylene Propylene Copolymer	0.155 Kg.
A3446	Catalyst 59-5/59-M containing ZnO 36% and Na2O 17% Al2 O3 30%	1 kg	1. Zinc Carbonate	0.616 Kg.
			2. Sodium bicarbonate	0.511 Kg.
			3. Alumina Trihydrate	0.480 Kg.
			4. Atta gel	0.154 Kg.
A3447	Ethylene Glycol Mono Ethyl Ether	1 kg	1. Denatured Ethyl Alchol	1.154 Kg.
			2. Triethyl Amine Catalyst	0.004 Kg.
A3448	Synthetic Tanning Agent containing Sodium salt of phenol sulphonic acid polymer with formaldehyde and urea (53%) Disodium Phthalate (12%)	1 kg	1. Phenol	0.217 Kg
A3449	N-N—DI-Sec-Butyl Para Phenylenediamine]	1 kg	1. Para Nitro Aniline	0.680 Kg.
			2. Methyl Ethyl Ketone	0.790 Kg.
			3. Platinum Catalyst (Platinum content 3%)	0.20 Gm.
A3450	Alpha (2, 4-Chlorophenyl) Ethyl)-alpha (1,1-dimethylethyl) 1H-1,2,4-Triazole-1-ethanol)	1 kg	1. Dipentone (1-(4-Chlorophenyl)4,4 dimethyl Pentane-3-one)	1.15 Kg.
			2. Dimethyl Sulfide	0.50 Kg.
			3. Formic Acid	0.32 Kg.
			4. Hydrazine Hydrate	0.66 Kg.
			5. Potassium Carbonate	1.02 Kg.
			6. Dimethyl Formamide	1.00 Kg.
			7. N-Heptane	1.00 Kg.
A3451	N-Isopropyl-N-Phenyl-P-Phenylenediamine	1 kg	1. P-Amino Diphenyl Amine	0.816 Kg.
			2. Acetone	0.319 Kg.
			3. Platinum Catalyst (Platinum content 3%)	0.098 gm.
A3452	Tri Phenyl Phosphine	1 kg	1. Sodium Metal	0.905 kg
			2. Yellow Phosphorous	0.206 kg
			3. Monochloro Benzene	2.378 kg
			4. Methanol	1.50 kg
			5. Toluene	2.00 kg
A3453	Solvent Orange3-(Chrysodine Y base)	1 kg	1. Meta Phenylene Diamine	0.582Kg.
			2. Aniline	0.480Kg.
A3454	Direct Red 239 (Dye content 68%)	1 kg	1. J-Acid Urea	0.363 kg.
			2. Beta Naphthol..	0.331 kg.
A3455	Pyridine Hydrochloride	1 kg	1. Pyridine OR	0.760Kg.
			1(a) Silica Alumina Catalyst OR	0.027Kg.
			1(a) Alumino Silicate Catalyst	0.0144Kg.
			1(b) Ethyl Alcohol (Denatured)	1.767Kg.
			1(c) Methanol	1.072Kg.
			2. Toluene	0.429Kg.
A3456	3,5-Dimethyl Piperidine	1 kg	1. Propionaldehyde	8.000Kg.
			2. Alumina Silica Catalyst	0.175Kg.
			3. Ruthenium Catalyst (Ruthenium content 5%)	0.007Kg.
A3457	3 Acetyl Pyridine	1 kg	1. Ethyl Acetate OR	1.770 Kg.
			1(a)Ethyl Alcohol denatured	0.915 Kg.
			1(b)Acetic Acid Glacial	1.267 Kg.
			2.Methyl Nicotinate OR	1.572 Kg.
			2. 3-Cyanopyridine OR	1.619 Kg.
			2(a)Alumina Silica Catalyst	0.037 Kg.
			2(b)Denatured Ethyl Alcohol	3.842 Kg.
			2(c) Methyl Alcohol	2.275 Kg.