Home || Export Import Policy & DGFT matters  || Customs matters || Central Excise matters || Shipping and Logistics Information
ieport.com - India's Premier portal on EXIM matters
 

DGFT PUBLIC NOTICE NO. 11/2004-09, DT. 01/10/2004
Amendments/additions/corrections in Standard Input output norms

In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

2. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, (Vol.2) 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A to this Public Notice shall be made.

3 In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-3388, new entries at Sl. No. A-3389 to A-4021 shall be added as per Annexure B to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1985, new entries at Sl. No. C-1986 to C-1994 shall be added as per Annexure C to this Public Notice.

PLASTICS PRODUCTS

After the existing entry at Sl.No.H-545, new entry at Sl.No.H-546 shall be added as per Annexure D to this Public Notice.

This issues in public interest.

Sd/-
( K. T. CHACKO )
DIRECTOR GENERAL OF FOREIGN TRADE

 

(F.No.01/87/171/00002/AM04/DES-VIII)

Annexure A to the Public Notice No. 11 Dated: 01/10/2004

AMENDMENTS/CORRECTIONS


Sl.No. Page No. Reference Amendments/Corrections
1 2 3 4
1. 130 Chemical & Allied Product Sl.No.A-956 The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A956 Sulphur Black 1 (Sulphur Black OG/Sulphur Black OG Grains) (Dye content 86%) 1 kg 1. Benzene 0.383 kg
2. Caustic Soda Flakes 0.951 kg
3. Soda Ash 0.061 kg
4. Sulphur 0.910 kg
5. Sodium Sulphide Flakes 0.295 kg
2. 167 Chemical & Allied Product Sl.No.A-1365 The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A1365 Hydroxylamine Sulphate 1 kg 1. Soda Ash 1.80 Kg
2. Ammonia 0.315 Kg
3. Catalyst (Platnium) 0.147 mg
4. Caustic Soda Flakes

OR
0.75 Kg
1. Sulphur 0.70 Kg
2. Ammonia 0.315 Kg
3. Catalyst(Platnium) 0.147 mg
4. Caustic Soda Flakes 2.05 Kg
5. Furnace Oil 0.80 ltr
3. 4 Chemical & Allied Product Sl.No.A1379 (Notified vide Public Notice No.77 Dated:26/08/2004) The norm covered by this entry stands deleted.
4. 231 Chemical & Allied Product Sl.No.A1802 The foot note below this entry is added:-

Note: In case of Zinc Sleeve Ball Pin Insulator, Zinc Ingots allowed at the rate of 1.05 kg/kg content of Zinc Sleeve in Export
5. 4 Chemical & Allied Product Sl.No.A2156 (notified vide Public Notice No.77 Dated:26/08/2004) The norm covered by this entry stands deleted.
6. 346 346 Chemical & Allied Product Sl.No.A2730 After the description of import item at Sl. No. 2, the following input item (with quantity) is amended to read as under:-

3. Ortho Di-Chloro Benzene - 0.728 kg
7. 5 Chemical & Allied Product Sl.No.A2843 (amended vide Public Notice No.10 Dated:30/05/2003) The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A2843 Offset Printing Ink Black (Pigment content 18+/-1% and Solid Resin 47+/-1% (Flush Route) 1 kg 1. Flush Black base for Printing Ink ( 46 +/- 1% Carbon Black and 41+/- 1% Solid Resin) 0.4120 kg
2. Printing Ink Vehicle Gel (Solid content 59+/-1%) Linseed Oil base OR Soyabean Oil Base) 0.2575 kg
3. Printing Ink Vehicle Plain (Solid Content 61+/-1%) Linseed Oil Base Or Soyabean Oil Base 0.2575 kg
4. Polyethylene Wax Compound containing 43%+/-1% Polyethylene wax 28+/-1%, Tung Oil 28+/-1% Refined Linseed Oil 0.0310 kg
5. PTFE wax compound containing 61%+/-1% PTFE wax, 33% +/- 1% Refined Linseed Oil 0.0020 kg
6. Cobalt Magnesium Combined Drier (metal content 12% +/-1% 0.2%) 0.0103 kg
7. Petroleum Distillate (Distillation Range 240-330 Degree C) 0.0597 kg
8. 6-7 Chemical & Allied Product Sl.No.A2844 (amended vide Public Notice No.10 Dated:30/05/2003) The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A2844 Offset Printing Ink Magenta/Rubine (Pigment content 15 +/- 1% and Solid Resin 43+/1% (Flush Route) 1 kg 1. Flush Magenta /Rubine base for Printing Ink ( 37 +/-1% Pigment and 33+/- 1% Solid Resin) 0.4120 kg
2. Printing Ink Vehicle Gel (Solid content 59+/-1%) Linseed Oil base OR Soyabean Oil Base) 0.2575 kg
3. Printing Ink Vehicle Plain (Solid Content 61+/-1%) Linseed Oil Base Or Soyabean Oil Base 0.2575 kg
4. Polyethylene Wax Compound containing 43%+/-1% Polyethylene wax 28+/-1%, Tung Oil and 28+/-1% Refined Linseed Oil 0.0310 kg
5. PTFE wax compound containing 61%+/-1% PTFE wax, 33% +/- 1% Refined Linseed Oil 0.0020 kg
6. Cobalt Magnesium Combined Drier (metal content 12% +/-1% 0.2%) 0.0103 kg
7. Petroleum Distillate (Distillation Range 240-330 Degree C) 0.0597 kg
9. 7-8 Chemical & Allied Product Sl.No.A2891 (amended vide Public Notice No.10 Dated:30/05/2003) The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A2891 Offset Printing Ink Yellow (Pigment content 14 +/- 1% and Solid Resin 43+/- 1% (Flush Route) 1 kg 1. Flush Yellow for Printing Ink ( 35 +/- 1% Carbon Black and 32+/- 1% Solid Resin) 0.4120 kg
2. Printing Ink Vehicle Gel (Solid content 59+/-1%) Linseed Oil base OR Soyabean Oil Base) 0.2575 kg
3. Printing Ink Vehicle Plain (Solid Content 61+/-1%) Linseed Oil Base Or Soyabean Oil Base 0.2575 kg
4. Polyethylene Wax Compound containing 43%+/-1% Polyethylene wax 28+/-1%, Tung Oil 28+/-1% Refined Linseed Oil 0.0310 kg
5. PTFE wax compound containing 61%+/-1% PTFE wax, 33% +/- 1% Refined Linseed Oil 0.0020 kg
6. Cobalt Magnesium Combined Drier (metal content 12% +/-1% 0.2%) 0.0103 kg
7. Petroleum Distillate (Distillation Range 240-330 Degree C) 0.0597 kg
10. 20 Chemical & Allied Product Sl.No.A3161 (amended vide Public Notice No.03 Dated:31/03/2003) The description of export item is amended to read as under:-

Perfumed Candles in Terracotta Pot/Glass container of different shapes and sizes
11. 20 Chemical & Allied Product Sl.No.A3253 (amended vide Public Notice No.27 Dated:06/10/2003) The quantity of import item at Sl. No. 1, is amended to read as under:-

0.790 kg
12. 43 Chemical & Allied Product Sl.No.A3340 (amended vide Public Notice No.70 Dated:29/06/2004) 1. The description of import item at Sl. No. 5, (without any change in quantity) is corrected to read as under:-

Slyvablend FA 7002 / Dimer Acid

2. The description of import item at Sl. No. 11, (without any change in quantity) shall be corrected to read as under:-

Nonyl Phenol
13. 48 Chemical & Allied Product Sl.No.A3352 (amended vide Public Notice No.70 Dated:29/06/2004) In the description of import item at Sl. No.1, the word HBR is corrected to read as:-

NBR
14. 52 Chemical & Allied Product Sl.No.A3362 (amended vide Public Notice No.70 Dated:29/06/2004) In the description of export item, the word Petroleum is corrected to read as:-

Petrolatum
15. 11 Chemical & Allied Product Sl.No.A3381 (notified vide Public Notice No.77 Dated:26/08/2004) The norm covered by this entry stands deleted.
16. 12 Chemical & Allied Product Sl.No.A3386 (notified vide Public Notice No.77 Dated:26/08/2004) The description of export item is corrected to read as under:-

Liquid Paraffin / White Oil Heavy/ Mineral Oil Heavy BP/USP (Other than covered in SION No. A-3385
17. 12 Chemical & Allied Product Sl.No.A3388 (notified vide Public Notice No.77 Dated:26/08/2004) The description of export item is corrected to read as under:-

Liquid Paraffin / White Oil Heavy/ Mineral Oil Heavy (Other than covered in SION No. A-3387
18. 1 Chemical & Allied Product Sl.Nos. (Notified vide Public Notice No.77 Dated:26.08.2004) On page No. 1 of the said Public Notice, the numbering of the Standard Input Output Norms entries stands corrected to read as under:-

After the existing entries at Sl. No. A3378, New Entries At. Sl. No. A-3379 to A3388 are added as per Annexure B to this Public Notice
19. 6 Engineering Product Sl.No.C446 (Notified vide Public Notice No. 50 Dated:16/02/2004) In the description of export item the word and allied equipment stands deleted.
20. 8 Engineering Product Sl.No.C985 (amended vide Public Notice No. 46 Dated:06/11/2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C985 Automotive Radiators made of Copper & Brass 1 kg 1. Copper Foils 0.22 Kg
2. Brass foils/tubes

OR
0.22 kg
(a) Copper Cathode/ Wire bar / ingot/Rod 0.162 kg
(b) Zinc Ingot 0.07 kg
3. Brass Sheet

OR
0.31 kg
(a) Copper Cathode/ Wire bar/ Rod 0.228 kg
(b) Zinc Ingot 0.098 kg
4. (a) Tin Ingot 0.070 kg
(b) Lead Ingot 0.074 kg
5. Terene Sheet or CRCA Sheet/ Coil/ Strips 0.22 kg
6. Flux 1% of the FOB value
21. 23-24 Engineering Product Sl.No.C1058 (Amended vide Public Notice No.67 Dated:01.02.2002 & Amended vide Public Notice No. 03 Dated:31.03.2003) The description of import item at Sl. No. 1(c), (without any change in quantity) is amended to read as under:-

Lead Calcium Alloy containing Calcium between 0.035% to 0.16% and Tin upto 1.7%
22. 6 Engineering Product Sl.No.C1392 (Amended vide Public Notice No.35 Dated:05.12.2003) After the description of import item at Sl. No. 4, the following additional import item (with quantity) is added:-
5. Steel Armouring Wire 1.02 kg/kg content in export product
23. 803 Engineering Product Sl.No.C1504 The description of import item at Sl. No. 1, (without any change in quantity) is amended to read as under:-

Hot Rolled Silicon Electrical Steel Wide Coils of relevant grade containing 0.60% to 3.4% Silicon with varying quantity of Aluminium
24. 43 Engineering Product Sl.No.C1823 (Amended vide Public Notice No.44 Dated:18/10/2002) The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1823 Hydraulic Excavator 1 No. 1. Control Valve 1 No.
2. Swing bearing 1 No.
3. Pilot Valve 3 Nos.
4. FC Valve 1 No.
5. Seal Group 2 Nos.
6. Pump 1 No.
7. T R chain 2 Nos.
8. Other Relevant Component As per GN4.
9. Liquid adhesive
10. Calking
11. Sealant
The quantity of import item No.9 to 11 may be allowedwithin 1% of FOB value.
12. Welding Wire 2% of the weight of Steel to be welded.
13. Steel Tube 1 Mtr./Mtr. content in export product.
14. CDS Tube 1 Mtr./Mtr. content in export product.
15. Hose 1 Mtr./ Mtr. content in export product.
16. Steel Plate of relevant grade. 1.1 Kg./Kg. content in export product.
25. 18 Engineering Product Sl.No.C1862 (amended vide Public Notice No.61 Dated:03.02.2003) The quantity of export item is corrected to read as under:-

1 kg instead of 2 kg
26. 18 Engineering Product Sl.No.C1955 (Notified vide Public Notice No.58 Dated:12.04.2004) The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1955 Cupro Nickel Tubes 1 kg 1. Cupro Nickel Scrap of relevant grade 1.09 Kg.
27. 20 Engineering Product Sl.No.C1959 (amended vide Public Notice No.58 Dated:12/04/2004) The description of export item is amended to read as under:-

Pressure Die Cast/Sand Cast Components / Articles made of Aluminum Alloy
28. 2 Engineering Product Sl.Nos. (Notified vide Public Notice No. 77 Dated: 26.08.2004) On page No.2 of the said Public Notice the numbering of the Standard Input Output Norms entries stands corrected to read as under:-

After the existing entry at Sl. No. C- 1975, New entries at Sl. No. C1976 to C1985 are added as per Annexure C to this Public Notice
29. 961 - 962 Plastics Product Sl.No.H-5 The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-5 ABS Resin / Granules (Injection Moulding / Sheeting Grade) 1 MT 1. Styrene 639 kg
2. Aqcrylonitrile 271 kg
3. Butadiene 190 kg
4. Oleic Acid or Distilled Fatty Acid 21 kg
5. Teritary Dodecyl Mercaptan/ Normal Dodecyl Mercaptan 7 kg
6. Potassium Persulphate 5 kg
7. Disprosin / Rosin 25 kg
8. Ethylene Bisstearamide 25 kg
9. Antioxidant (OBP/Sumilizer/ DTDTDP/DBP/ TNPP/BHT/ Irgonox-1076 31 kg
10. Pigment/ Titanium Dioxide/Relevant Colour Master Batch 20 kg
11. Stearic Acid 3 kg
12. Palmitic Acid 2 kg
Note : 1. The import of item Nos. 11&12 may be allowed for the export of ABS Resin (Sheetings grade) and item No. 10 may be reduced to 15 kgs instead of 20 kg per ton export.

Note : 2. For the export of ABS Resin/Granules (Injection Moulding Grade) item No. 11 & 12 may not be allowed for import.
30. 1007-1008 Plastics Product Sl.No.H-268 The description of export item is amended to read as under:-

Drop Cloth made of PVC Leather Cloth / PVC Leather Cloth / Foam Leather Cloth, Single sided / Both sided (PVC Tarpaulin) having coating weight 1000 gms per Sq.Meter +/-5%
31. 1025 Plastics Product Sl.No.H-348 The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-348 White Opaque LLDPE Lamination Grade Film 1 kg 1. LLDPE Granules (Film Grade)

OR
1.05 kg
2. LLDPE Granules (Film Grade) 0.966 kgs
3. White Master Batch 0.084 kgs
32. 1030-1031 Plastics Product Sl.No.H-383 The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-383 Multi Layer Co-Extruded Plastic Packaging Material (Printed /Unprinted) 1 kg 1. LDPE Granules (Film Grade) 1.05 kg/kg content in the export product
2. LLDPE Granules (Film Grade) 1.05 kg/kg content in the export product
3. Ethylene Acrylic Acid Co-polymer Granules 1.05 kg/kg content in the export product
4. Liquid Printing Ink 0.01 kg
Note: 1. In case of export of coloured items, Relevant Colour Master Batch shall also be allowed as an additional input at 0.02 kg/kg and the weight of Polymers at Sr. No. 1,2 and 3 above may be reduced to 1.03 kg/kg contained in the export product.

Note: 2. The Liquid Printing Ink may be allowed in case of printed export product.
33. 1031 Plastics Product Sl.No.H-391 The norm covered by this entry is substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-391 Plastic Hangers 1 kg 1. Relevant Plastic Moulding Powder/ Granules i.e. PP/HIPS/ ABS 1.05 kg/kg content in the export product
2. (A) Non Alloy CRCA Sheet/Slip for metal Clips

OR
1.05 kg/kg content of metal clips contained in the export product
Relevant Metal Clips Net + 2% wastage
3. Non-Alloy Steel Wire 1.01 kg/kg content in the export product
34. 2 Textile Product Sl.Nos. (Notified vide Public Notice No. 77 Dated: 26.08.2004) On page No. 2 of the said Public Notice the numbering of the Standard Input Output Norms entries stands corrected to read as under:-

After the existing entry at Sl. No. J-361 New entry at Sl. No. J-362 is added as per Annexure D to this Public Notice
35. 1132 Miscellaneous Product Sl.No.K-77 The norm covered by this entry stands deleted.



Annexure B to the Public Notice No. 11 Dated: 01/10/2004

CHEMICALS AND ALLIED PRODUCTS

Sl.No. Export Item Qty. Import Item Qty. Allowed
A3389 Oil soluble Phenolic resin based varnish (high viscosity) (solid resin content Min. 55.7% + 2%) 1.00000 kg 1. Glycerine 0.00005kg
2. Tertiary butyl catechol 0.00010kg
3. Tri phenyl Phosphite 0.00012kg
4. Light Magnesium oxide 0.00012 kg
5. Bis phenol-A 0.00220kg
6. Butylated hydroxy toluene 0.00407 kg
7. Para tertiary butyl phenol 0.00463 kg
8. Nomelt -2- 1200/ high melting grease 0.00490kg
9. Slyvablend FA 7002/dimmer acid 0.00572kg
10. Trimethylol propane 0.00651kg
11. Oxy aluminium octoate ( OAO) 0.01523 kg
12. Iso phthalic acid 0.1949 kg
13. Para formaldehyde 0.02355kg
14. Neodene 0.02387 kg
15. Fumeric acid 0.03550 kg
16. Penta erythritol 0.03676 kg
17. Texanol iso butyrate 0.08230 kg
18. Refined linseed Oil 0.08596 kg
19. Nonyl phenol 0.13750 kg
20. Rosin namely gum rosin / tall oil rosin 0.17020 kg
21. Dicyclo pentadiene 0.18043 kg
22. Petroleum distillate (distillation range: 240-330 degree centigrade) 0.33202 kg
A3390 Sodium salt of Trichloro Pyridinol (purity 100% basis) 1 kg 1. Trichloro acetyl chloride 1.068 kg
2. Acrylonitrile 0.396 kg
3. Ethylene dichloride 0.096kg
4. Caustic soda lye 0.848kg
5. Solvent C-9 0.012kg
A3391 Calcium Gluconate Monohydrate 1 kg 1. Dextrose Monohydrate 1.017 kg
A3392 2,6 Dimethyoxy Phenol 1 kg 1. Gallic Acid 1.628 kg
A3393 Gatifloxsacin Hemihydrate 1 kg 1. 2,4,5 Trifluoro-3- Methoxy Benzoic Acid 1.21 Kg./Kg.
2. 2- Methyl Piprazine 0.39 Kg./Kg.
3. Actonitrile 1.0 Kg./Kg.
4. Cyclopropylraxine 0.18 Kg./Kg.
5. Dimethyl Formamide 0.77 Kg./Kg.
6. Dimethyl Sulfoxide 1.0 Kg./Kg.
7. Potassium carbonate 0.98 Kg./Kg.
8. Toluene 3.00 Kg./Kg.
A3394 Lavofloxacin Hemihydrate 1 kg 1. 2,3,4,5 Tetrafluoro Benzoic Acid 1.87 Kg.
2. Dimethyl Sulphoxide 2.07 Kg.
3. Dimethyl Formamide 3.60 Kg.
4. Methylene Chloride 1.50 Kg.
5. S(+)-2-Amino Propanol 0.72 Kg
6. 2, Methyl Piperazine 0.45 Kg.
A3395 Celecoxib 1 kg 1. Trifluoro Acetic Acid 0.62 Kg.
2. Sodium Methoxide 0.30 Kg.
3. Methanol 1.77 Kg.
4. Dimethyl Formamide 1.77 Kg.
A3396 N-(1-Oxopenthyl)-N (2-H-Tetrazol-5-YL) (1-1Biphenyl)-4- YL)-L-Valine 1 kg 1. 2-Cyano-4-Methyl Biphenyl 1.94 Kg.
2. L-Valine 0.89 Kg.
3. Valaeric Acid 0.58 Kg.
4. Dimethyl Formamide 1.20 Kg.
5. Isopropyl Ether 7.94 Kg.
6. Methylene Chloride 7.33 Kg.
A3397 Methyl Gallate 1 kg 1. Gallic Acid 1.026 kg
A3398 Mirtazepine 1 kg 1. Thionyl Chloride 3.76 kg.
2. Methylene Chloride 8.50 kg
3. Benzyl Chloride 1.62 kg.
4. Dimethyl Formamide 4.50 kg.
5. Sodium Bis (2- Methoxy Ethoxy Aluminium Hydride) (Vitride/ Synhydride) 4.90 kg.
6. 5% Palladium on Carbon 0.100 kg.
7. 2-Chloro Nicotino Nitrile 1.29 kg.
8. Tetrahydrofuran 6.50 kg.
A3399 Ornidazole 1 kg 1. 2-Methyl-5-Nitro Imidazole 1.45 Kg.
2. Epichlorohydrin 4.80 Kg.
3. Methyline Chloride 1.55 Kg.
A4000 Flush in various colours for Printing Ink (35+/-1% Pigment and 32+/- 1% Solid Resin) other than Black, Cyan, Magenta & Yellow) 1 kg 1. Relevant Pigment 0.36 kg
2. Printing Ink Vehicle Plain (Solid content 61+/-2%) (linseed Oil base or Soya bean oil base) 0.34 kg
3. Alkyd resin namely soya long oil alkyd resin of 70% oil length having solid content 100% / Linseed oil base alkyd resin (long oil length) having solid content 100% 0.012 kg
4. Petroleum Distillate (Distillation range 240-330 Degree C 0.13 kg
5. Oleyl Alcohol 0.03 kg
6. Anti Oxidant, namely BHT and MEHQ 0.01 kg
7. Texanol Isobutyrate 0.03 kg
A4001 Copper & Lead Free Mirror on Float Glass 1 M.T. (not less than 100 sq. meter) 1. Clear Glass

OR
1.05 MT (not more than 105 Sq. meter)
1(a) Silica Sand 828.45 kg
1(b) Soda Ash (Sodium Carbonate Dense) 249.90 kg
1(c) Dolomite 197.40 kg
1(d) Calcite (Calcium Carbonate) 79.275 kg
1(e) Sodium Sulphate 9.45 kg
1(f) Furnace Oil 246.75 kg
1(g) PMMA Base Interlevant Powder 0.0492 kg
2. Mirror Back Paint Top Coat Lead Free (70% Solid Content) 9.258 kg
3. Mirror Back Paint Premier Lead Free (50% Solid Content) 9.151 kg
4. Xylene 2.497 kg
5. Silver Nitrate Solution (25% w/v Silver Nitrate) 0.7903 Litres
6. Palladium Chloride Solution (50 Grams/Litre) 0.01615Litres
7. Reducer Solution consisting of Sodium Hydroxide and Sodium Gluconate 0.7637 Litres
8. Silane Solution containing Amino Propyl Triethoxy Silane 0.0727 Litres
9. Tin Chloride Solution (1.2 grams/ litre) 0.01055Litres
10. Pine Wood As per Packing Policy
11. High Tensile Steel Strap Cold Rolled Painted / Wax Coated As per Packing Policy
12. Seal for Steel Strap As per Packing Policy
13. Polyester Ratchet Assembly (Tie Down with J Hook on Ratchet Buckle Fixed As per Packing Policy
14. Unit Clay Tyvek/ Bentonite As per Packing Policy
15. Cargo Dry As per Packing Policy
A4002 Pearl Essence Pigment (Titanium Oxide : Tio2 content =28% ) 1 Kg 1. Titanium Oxychloride (asTio2 =25%) 1.287 Kg
2. Caustic Soda 0.930 Kg
A4003 Non tracking Coated Skirts/ Breakout for Cable Jointings 1 kg 1. Ethylene Copolymer based Polymeric Compound (Type DC 1032) 1.10 kg/kg content in the export product
2. Butyl Rubber based Coating compound Net to Net
A4004 Polypropylene Multifilament Yarn (with 2% U.V. Stabilizer) 100 kg 1. Polypropylene Chips/ Granules/ Resins 104.0 kg
2. Master Batch Polypropylene Dyed/ Relevant Colour Master Batches 4.15 kg
3. U.V. Stabiliser 2.00 kg
4. Spin Finish Oil 2.33 kg
A4005 3 -Chloropropiophenone 1 kg 1. Propiophenone 1.39 kg/kg
A4006 Piperazine Di Hydrochloride 1 kg 1. Piperazine Water Solution (on 100% basis) 0.540 kg
A4007 Hydrotreating - Cum - Desulphurisation Catalyst Type: G1 Catalyst containing Zinc Oxide 85+/-3% and Molybdenum Trioxide 3.5+/-0.3% 1 kg 1. Zinc Metal 0.694 kg
2. Molybdenum Trioxide 0.035 kg
A4008 (-) Menthyl Trans- 4(4-Fluorophenyl)- N- Methyl Nipecotinate Hydrobromide 1 kg 1. Potassium Tertiary Butoxide 1.10 kg/kg
2. Sodium Boro Hydride 1.40 kg/kg
3. Para Amino Fluoro Benzene 2.57 kg/kg
4. Tetra Hydro Furan 8.25 kg/kg
5. Di Butyl Ether 3.66 kg/kg
A4009 Articles made of Polyphenylene Oxide such as mounting Plate containing metallic foil and Banana Plug 1 kg 1. Polyphenylene Oxide 1.05 kg/kg of net content in the export product
2. Metallic Foil On net to net basis with accountability of its use in the export
3. Banana Plug On net to net basis with accountability of its use in the export
A4010 Fortified Gum Rosin Dispersion containing 60% Rosin 1 kg 1. Rosin 0.600 kgs
A4011 Automobile Exhaust Catalyst Honey comb type EC 800 sizes 81.28 mm x 144.78 mm x 75.3 mm length containing Palladium content : 0.210 gm Rhodium content : 0.210 gm Cerium Oxide content : 10.6 gm and Clay Washcoat Powder : 52 gm 1 No. 1. Relevant Ceramic Honeycomb Subtract (Size 81.28 mm x 144.78 mm x 75.3 mm length) 1 No.
2. Palladium as Palladium Chloride 0.210 gm
3. Rhodium as Rhodium Nitrate Solution 0.042 gm
4. Collodial Cerium Acetate 0.054 kg
5. Clay Wash coat Powder 0.052 kg
A4012 Automobile Exhaust Catalyst Honey comb type EC 1500 M size 132.08 mm x 78 mm Length containing : Platinum content : 0.251 gm Cerium Oxide content : 14.32 gm and Zirconium Oxide 19.67 gm 1 No. 1. Metallic Honeycomb Subtract (Size 132.08 mm dia x 78 length) 1 No.
2. Platinum as Platinum Sulphite Acid Solution 0.251 gm
3. Collodial Cerium Acetate 0.055 kg
4. Zirconium Colladial 0.020 kg
5. Zirconium Oxide Powder 0.019 kg
6. Washed Silica Powder 0.032 kg
A4013 Hydro treating cum Desulphurisation catalyst Type : G-1 Catalyst containing Zinc Oxide 85+/-3% and Molybdenum Trioxide 3.5+/-0.3% 1 kg 1. Zinc Metal 0.694 kg
2. Molybdenum Trioxide 0.035 kg
A4014 G-117 Catalyst Shape = Rib rings containing Ni-O 8% min. 1 kg 1. Nickel Metal 0.625 kg
2. Special grade Alumina Powder 0.033 kg
3. Magnesium Oxide 0.822 kg
4. Tylose (Methyl Hydroxy Ethyl Cellulose) 0.030 kg
A4015 Pigment Red 108 (Cadmium Red Pigmetn C.I.No. 77202 Cadmium content : 54+/-2% Selenium content : 14+/-2% 1 kg 1. Cadmium Metal 0.621 kg
2. Selenium Metal 0.161 kg
3. Barium Sulphate 0.160 kg
A4016 Sulphur Powder/ Roll 1 kg 1. Sulphur Crude 1.025 kg/kg
A4017 Leather Chemical Disodium Salt of Sulphonated containing C18 Fatty Acid 65+2% Alkyl Benzene Sulphonate 3% Heavy Alkyl 6.5% Oxo Alcohol 2.8% Chlorparaffin 4.5% 1 kg 1. C18 Fatty Acid (Oleic Acid, 63% Minimum) 0.458 kg
2. Alkyl Benzene Sulphonate 0.03 kg
3. Heavy Alkyl 0.065 kg
4. Oxo Alcohol 0.028 kg
5. Chloroparaffin 0.045 kg
A4018 Prepared Adhesive based on Plastics (Two component Laminating Adhesives) Adhesive (Polyurethane Resin containing 100% Resin 1 kg 1. Adipic Acid 0.221 kg
2. Diethylene Glycol 0.107 kg
3. Mono Ethylene Glycol 0.010 kg
4. Methyl Propane Diol 0.100 kg
5. Diphenyl Methane 4,4, Diisocynate 0.623 kg
A4019 Prepared Adhesive based on Plastics (Two component Laminating Adhesives) Additive (Polyester Resin containing 100% Resin 1 kg 1. Adipic Acid 0.587 kg
2. Diethylene Glycol 0.284 kg
3. Mono Ethylene Glycol 0.025 kg
4. Methyl Propane Diol 0.264 kg
A4020 2,6, Dinitro-4-terito Butyl Chlorobenzene 1 kg 1. Para Tertiary Butyl Chlorobenzene (purity 97% min.) 0.840 kg
2. Iso Propyl Alcohol 0.461 kg
A4021Di (2-Ethythexyl) Peroxy Di Carbonate 50% Purity1 kg 1. 2-Ethylhexyl Chloroformate 0.587 kg
2. Dequest 2060 S (Diethylenetriaminep enta) (Methylene Phosphonic) Acid, Aqueous Solution 0.0005 kg



Annexure C to the Public Notice No. 11 Dated: 01/10/2004

ENGINEERING PRODUCTS



Sl.No. Export Item Qty. Import Item Qty. Allowed
C1986 Reducing Bushings of mild steel for rigid/IMC conduit 1 kg 1. Mild Steel Round Bars As per Table given in the foot note.
2. Zinc (If export product is galvanised) 0.8% of weight of export product
Note: The quantity of import of Mild Steel Round Bars to be allowed as under:-



S.No. Size of export product Raw material in Kg to be allowed for 1 Kg of export product
(a) (b) (c)
1 ¾" X ½" X 9/16" L 4.00
2 1" X ½" X 5/8" L 2.10
3 1" X ¾" X 5/8" L 3.75
4 1 ¼" X ½" X ¾" L 1.80
5 1 ¼" X ¾" X ¾" L 2.35
6 1 ¼" X 1" X ¾" L 2.90
7 1 ½" X ½" X ¾" L 1.70
8 1 ½" X ¾" X ¾" L 1.80
9 1 ½" X 1" X ¾" L 2.50
10 1 ½" X 1 ¼" X ¾" L 5.00
11 2" X ½" X 7/8" L 1.50
12 2" X ¾" X 7/8" L 1.65
13 2" X 1" X 7/8" L 1.95
14 2" X 1 ¼" X 7/8" L 2.65
15 2" X 1 ½" X 7/8" L 3.70



C1987 Online Regulator for LPG Applications 1 No. 1. Zinc Ingot 1.10 Kg/Kg content in the export product
C1988 Integrated Regulator for LPG Applications 1 No. 1. Zinc Ingot 1.10 Kg/Kg content in the export product
2. Brass Scrap 1.075 Kg/Kg content in the export product
3. Pressure Gauge Net to Net
4. O-ring Net to Net
5. QCC Type I Connector Net to Net
C1989 Brass Retrofit Adaptor for LPG Applications 1 No. 1. Brass Scrap 1.075 Kg/Kg content in the export product
2. Pressure Gauge Net to Net
3. O-Ring Net to Net
4. QCC Type I Connector Net to Net
C1990 Brass OEM Adaptor for LPG Applications 1 No. 1. Brass Scrap 1.075 Kg/Kg content in the export product
2. Pressure Gauge Net to Net
3. O-Ring Net to Net
4. QCC Type I Connector Net to Net
C1991 Compact Regulator for LPG Applications 1 No. 1. Zinc Ingot 1.10 Kg/Kg content in the export product
2. Brass scrap 1.075 Kg/Kg content in the export product
3. Pressure Gauge Net to Net
4. O-Ring Net to Net
C1992 Screw Type Regulator for LPG Applications 1 No. 1. Zinc Ingot 1.10 Kg/Kg content in the export product
2. Brass Scrap 1.075 Kg/Kg content in the export product
3. Pressure Gauge Net to Net
4. O-Ring Net to Net
C1993 Brass Cages for Ball and Roller Bearings 1 kg 1. Brass Scrap 1.22 Kg./Kg. content in export product
C1994 Electrolytic Iron Powder (Food grade) having purity of 99.5% and above 1 kg 1. M.S. Plate 1.80 Kg.



Annexure D to the Public Notice No. 11 Dated: 01/10/2004

PLASTIC PRODUCTS

Sl.No. Export Item Qty. Import Item Qty. Allowed
H546 Synthetic (Plastic) Fishing Nets 1 kg 1. Relevant Knotless HDPE Raschel Netting (For bottom of fishing net) 1.05 kg/kg content in the export
2. For 1 kg of HDPE Knotted netting content in the export product

(i) HDPE Granules
1.06 kg/kg content in the export product
(ii) Relevant Colour Master Batch 0.02 kg
3. For 1 kg of PP Twine /Rope content in the export product
(i) PP Granules
1.05 kg/kg content in the export product
(ii) Relevant Colour Master Batch 0.02 kg
4. Relevant Lead Sinkers 102 No/100 No. Content in the export product
5. Relevant EVA Floats 102 No./100 No content in the export product.
Note: In case of export of coloured items, Relevant Colour Master Batch shall be allowed and not in other cases.

***********