Updated Customs Notification No- 21/2002 dated 01.03.2002
General Exemption - List Part-2

(1) Omitted
(2) Ferrite parts including memory cores and ferrite magnets
(3) Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC
(4) Connectors
(5) Magnetic -Heads (all types)
(6) Omitted
(7) Ceramic / Magnetic cartridges and stylus
(8) Omitted
(9) Microphones /Microphone cartridges
(10) Omitted
(11) Antennas
(12) Relays of contact rating upto 7 amperes
(13) EHT cables
(14) Level meters/level indicators/ tuning indicators/ peak level meters/ battery meter/ VC meters / Tape counters
(15) Tone arms
(16) Microwave passive parts
(17) (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket (v) Spark gap (vi) Degaussing coil
(18) Fibre optics and other optoelectronic parts and devices namely, Couplers, Attenuators, Connectors, Splicers, Multiplexers and Demultiplexers
(19) Passive optical parts, namely, Microlens and splitters, Micropositioners, Optical filters and gratings and Phase plates
(20) Special purpose optical fibres, namely, polarisation holding fibres, plastic fibres and large core fibres
(21) Electron guns
(22) Omitted
(23) Omitted

(In List 26 items (1), (6), (8), (10), (22) and (23) has been omitted vide CUS NTF NO. 11/2005 DATE 01/03/2005)
 

1 Deflection parts, namely:- (i) EHT/LOT/FBT transformers (ii) Line driver transformers (iii) Deflection coil/yoke (iv) Linearity coil (v) Width coil
2 Air cored and ferrite cored transformers
3 RF/IF coils, inductance coils, peaking coils, tuning coils
4 Loud speakers (cone type)

(List 26A has been inserted vide CUS NTF NO. 11/2005 DATE 01/03/2005)

 

(1) Television cameras with portable field video recorders (professional grade)
(2) Audio recording equipment
(3) Table top post production video editing machines
(4) Four source editing controllers to control editing machines
(5) 8-channel video mixer/switches
(6) Special effect generators for fading and superimposing of text and graphics
(7) Time base correctors / Frame synchronisers
(8) Broadcast standard 3-D computer graphic systems
(9) Professional grade colour video monitors
(10) Portable lighting equipment with lamps for shooting in low light situation
(11) Professional grade photographic cameras of all formats
(12) Dark room equipment including enlargers
(13) Computer control editing machines
(14) Spares and accessories of above mentioned equipment as permitted by the Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting
 

1. Cell cultivation devices, namely, roller bottle systems and spinner flasks
2. CO2 incubator
3. DNA/Oligonucleotides Synthesizers
4. Electrophoresis system – (Protein & DNA; 2D)
5. ELISA Reader
6. ELISA Washer
7. Fluorimeters
8. Low Temperature Freezers (minus 70 degrees and less)
9. Spectrophotometers (including Nuclear Magnetic Resonance Spectrometers);

(List 27A has been inserted vide CUS NTF NO. 11/2005 DATE 01/03/2005)
 

(1)UV/Visible spectrophotometer, either with PDA and/or kinetics measurement and low bandwidth,
(2) Preparative chromatographic system,
(3) Chiral columns and other HPLC columns for specific application,
(4) X-ray diffraction equipment,
(5) Capillary electrophoresis,
(6) Robotic sample processing system,
(7) Particle size analysers, laser diffraction, lights scattering and photocorrelation spectroscopy types,
(8) Atomic absorption Spectrophotometer,
(9) Tensiometer,
(10) Moisture balance,
(11) Elemental analyser,
(12) High Precision Auto titrator,
(13) TOC Analyser,
(14) Ion Chromatograph,
(15)Spectrofluorimeter.Luminescence meter,
(16) Parenteral particle counting system,
(17) Particle shape analyser,
(18) FT-NIR Spectrophotometer,
(19)FT-Raman Spectrophotometer,
(20) Spectropolarimeter,
(21) Adsorption gas apparatus,
(22) Freezing point apparatus,
(23) Hot stage microscope,
(24) Osmometer,
(25) Porosity analyser,
(26) Sample preparation instrument,
(27) Automated sampling devices,
(28) Surface area analyser,
(29)Multiple organic synthesizer
(30) Focussed Microwave oven for ortoanic synthesis,
(31) Immersion cooling probe for 100 oc,
(32) High Pressure hydrogenator,
(33) Gas generators,
(34) Automated dissolution test apparatus, including robotics,
(35) Stability chambers conforming to ICH guidelines,
(36) Rotational visco meter and Rheometer,
(37) Assembly for lontophoresis studies,
(38) Ultra filteration equipment,
(39) Diffusion cell apparatus,
(40) Densitometer,
(41) Sustained release apparatus,
(42) Suppository testing device,
(43) Zeta potential analyser,
(44) Ultracentrifuge,
(45) Inverted microscope with fluorescence microscopy and photographic attachments,
(46) Transilluminator,
(47) Moodular protein electrophoresis apparatus (1D/2D),
(48) Nucleic acid sequencer,
(49) Imaging densitometer,
(50) Fast-protein Liquid Chromatography,
(51) U.V. Crosslinker,
(52) Probe Sonicator
(53) Sintillation counters (Y and B),
(54) CO2 incubator,
(55) Incubator shakedr for bacterial culture,
(56) Polymerase chain reaction machine,
(57) Cell harvestor,
(58) Speed Vac,
(59) Hybridizing oven,
(60) Protein sequencer,
(61)Confocal microscope,
(62) Capillary electrophoresis,
(63) Electroporator,
(64) Scanning electron microscope,
(65) Amino acid analyser,
(66)Peptide synthesizer,
(67) Phosphor imager,
(68)Fluorescence activated cell sorter,
(69)ELISA reader
(70) Fermenter,
(71) Spray drier,
(72) Protein purification set up,
(73)Stimulator,
(74)Two channel organ bath (with two channel recorder accessories) (a) Isotonic transducer (b) Isometric transducer (c) Pressure transducer,
(75) Plethymsometer,
(76) Blood pressure monitor,
(77) Blood pressure manual scanner,
(78) Auto analyser,
(79) Biofuge,
(80) Passive avoidance apparatus with controller,
(81) Auto stainer,
(82) Microtome,
(83) Cell harvestor,
(84) Tissue embedding machine,
(85) 4 channel auto track system,
(86) Blood cell counter,
(87) Blood flow meter,
(88) Stereotaxic microscope,
(89) Microdialysis (pull-push counter),
(90) Radiotelemetric monitoring system,
(91) High speed refrigerated research centrifuge,
(92) pH meter (3 decimal reading),
(93) Microscope phase contrast,
(94) Microscope polarizing,
(95) Vacuum rotary evaporators with digital display and control, different sizes,
(96) Freeze drier (Lyophilizer),
(97) Precision pipetting devises,
(98) Refrigerated bath,
(99) Low temperature circulatory bath (-33 o C),
(100) Magnetic stirrer with precision temperature control and digital display,
(101) Thermostatic blocks (Dry bath) with or without magnetic stirring facility.
 

1. Aminoacid Analyser
2. Analytical Balances
3. Anemometers
4. Anesthesia Equipment
5. Atomic Absorption spectrophotometer
6. Atomiser
7. Attrition Measurement Equipment
8. Auto Analyserclinical chemistry.
9. Auto lgnition test apparatus.
10. Auto radiography equipment
11. Auto titrator.
12. Automatic cover slipper.
13. Automatic slide stainer.
14. Automatic tissue processor.
15. Ball tube distillation apparatus.
16. Basic Glove Boxes.
17. Basic Orbital and Horizontal Shakers.
18. Biolistic (Gene gun).
19. Biological Oxidiser.
20. Biopsy punches.
21. Blood Cell Counter.
22. Blood flow Meter.
23. Blood sampling equipments.
24. Body composition analysis equipment.
25. Bottom Top Dispenser.
26. Brookfield viscometer.
27. Butane fuel microtorches.
28. Cardiac monitors.
29. Cell lines.
30. Centrifuges and Ultra Centrufuge.
31. Chilling incubators.
32. Coating Apparatus
33. Crusher (tissue).
34. Crystal/freezing microtone and Ultramicrotone.
35. Densitometer.
36. Differential Scanning Calorimeter.
37. Digital Boiling point/melting point/Freezing point apparatus.
38. Digital Cameras.
39. Digital pH meter.
40. Digital Stroboscope.
41. Digital Temperature.
42. Controllers.
43. Digital theremometer for recording body temperature of experimental animals.
44. Direct insertion probe.
45. Disntegration Test Machine.
46. Dissolved oxygen Meter.
47. Dry ice makers
48. Dust generator and measurement apparatus.
49. Dyno Mill.
50. Dlectronic Top Loading Balance.
51. Electrophoresis unit.
52. Electroporator.
53. Elemental analyser.
54. Elisa reader Monoclonal antibody production equipment.
55. Encapsulation equipment.
56. Flame photometer.
57. Flash point apparatus.
58. Flask Chromatographic system.
59. Fluid Bed Drier lab model.
60. focused Microwave overn for organic synthesis.
61. Freeze drier.
62. Freezing point apparatus.
63. Freezing rack for metabolic cages.
64. Gas Detectors with masks, cartridges gas monitors.
65. Gel Dryer and Gel documentation and analysis system.
66. Granulator-laboratory granulator.
67. Plant Growth chambers.
68. Health monitoring equipment.
69. Heart monitors for dogs and higher animals.
70. High vacuum pumps.
71. High pressure autoclave.
72. High pressure hydrogenerator.
73. High pressure reactor-Autoclave.
74. High speed refrigerated research centrifuge.
75. High throughput organic synthesizer, High throughput biological screening equipment.
76. Hybridizing overn
77. Image Analyzer and Imaging Densitometer.
78. Implantable Plant.
79. Incubators.
80. Inductive coupling plasma equipment
81. Infrared temperature sectos.
82. Inhalation chambers with accessories.
83. Laser particle size analyzer. Particle shape analyzer, Surface area analyzer.
84. Liquid scintillation counter.
85. Low Temperature Circulation Bath.
86. Micro and Micro soxlet extractors
87. Microscope and Microtome blades disposable.
88. Reation colorimeter.
89. Otoscopes.
90. Peristaltic pumps.
91. Phototachometer.
92. Polorimeter
93. Porometer and Porosity analyzer
94. Potentiometer.
95. Precision vacuum contractor.
96. Probe sonicator.
97. Protein purification machine.
98. Radiodetector, radiommunoassy equipment, Gamma counter for hormonal assay.
99. Refractometer and Rotary evaporators.
100. Rheometer.
101. Rotary microtomes, Rotary evaporators.
102. Silverson homogeniser.
103. Spectrofluorimeter Luminescence meter.
104. Spheriodizer
105. Spinning band distillation apparatus.
106. Spray drier
107. Submersible Magnetic Stirrer.
108. Super critical fluid chromatography systems.
109. Sustained release apparatus.
110. Syringes.
111. Tattooing instrument.
112. Tintometer.
113. Tissue embedder.
114. Transilluminator
115. Zeta poteltial analyzer
116. Ultrasonic cleaners.
117. Oscilloscope.
118. Ultrafilaration equipment
 

(List 29 has been omitted vide CUS NTF NO. 26/2003 DATE 01/03/2003)
 

(1) Singeing machine
(2) Fabric reversing machine
(3) Yarn drying machine
(4) Volumetric/Gravimetric measurement liquid chemical station
(5) Lab dye preparation machine
(6) Lab infra Red Drying Machine
(7) Continuous weight reduction machinery through microwave technique
(8) Kier decatising/continous decatising machine
(9) Solvent scouring machine
(10) Blanket Fringing Machine
(11) Raising/Brushing Machine
(12) Circular Knitting Machine
(13)Industrial Sewing machine
(14)Single needle bed drop feed lockstitch machine
(15) Single needle lockstitch flat bed machine
(16) Single needle flat bed drop feed lockstitch machine with speed more than 3500 stitches per minute
(17) High speed twin needle feed lockstitch machine
(18) High speed two needle lockstitch machine
(19) Computerised multineedle lockstitch/chainstitch machine
(20) Single needle lockstitch machine with built in trimmer
(21) Blind stitch machine of various models
(22) Single needle drop feed chainstitch machine
(23) Two needle chainstitch or lockstitch machine
(24) Chainstitch overedging machine
(25) Two or three needle chainstitch machine
(26) Two thread chainstitch for high speed seaming and banding operation with gear driven pulled feed/compount feed of speed 3500 stitches per minute and above.
(27) Safety stitch machine.
(28) Power driven flat bed knitting machine
(29)Computerised flat bed knitting machine
(30) Power operated flat lock/overlock machine
(31) Linking machine
(32) Loop making machine
(33) Power driven socks knitting/gloves knitting machine.
(34) Whole garment making machine (knitted)
(35) Plain stitching machine with more than 3500 stitches per minute
(36) Computerised plain stitching machine with more than 3500 stitches per minute
(37) High speed needle feed two needle flat bed industrial sewing machine.
(38) Sewing machine zig-zag flat bed
(39) High speed multiple needle sewing machine
(40) Class feed of the arm industrial sewing machine.
(41) Button hole sewing machine
(42) Button stitch sewing machine.
(43) Elastic inserting machine (on a variety of garments)
(44)Belt attaching machine
(45) Zip attaching machine
(46) Bar tacking machine
(47) Hemstitch machine
(48) Smoking machine
(49) Power driven cloth cutting machine.
(50) Band knife cutting machine
(51)Collar turning and blocking machine and cuff turning and blocking machine.
(52) Cuff press
(53) New automatic collar turning machine
(54)Automatic pocket welt sewing machine or Automatic pocket welting machine
(55) Pocket creasing machine
(56) Embroidery machine with 10 heads and above
(57) Computerised embroidery machine
(58) Printing and curing machine
(59) Quilting machine
(60) Snap fasterns fixing machine and/or siwa thereof
(61)Thread cleaning machine
(62) Steam Press
(63)Portable boiler for steam press
(64) Steam Cabinet
(65) Vaccum table
(66) Fusing press
(67) Dry to Dry cleaning machine
(68) Stain/spot removing machine/gun
(69) Automatic 25-needle shirring/smoking machine
(70) Shirt folding machine
(71) Form finisher
(72) Collar contour trimmer
(73) Spreading machine
(74) Shoulder pad attaching machine.
(75) Shrinkage controlling machines for knitting fabrics
(76) Loopdrivers for tubular knitted fabrics
(77) Mercerising machines for tubular knitted fabrics
(78) Singeing machines for tubular fabrics.
(79) Pile cutting machines for knitted fabrics
(80) Rotating edging machine for fabric rolls
(81) Conveyors for garments
(82) Garment Calendering machine
(83) Tie making machines
(84) Labelling machines
(85) Laying and cutting machines
(86) Button and Rivet fixing machine and/or dies thereof
(87) Weft straightening and calendering machine
(88) Slit Opening Machine
(89) Lab Yarn dyeing machine
(90) Lab dyeing machine
(91) Lab pressing machine
(92) Automatic cone winding machine with yarn splicer and auto doffing system
(93) Drawing in machine
(94) Computer aided design system
(95) Fully automatic grey fabric inspection machines with roll to roll winding having microprocessor recorder
(96) Colour matching computer
(97) High speed Intersecting Rotary/Chain/Pin Drawing Sets/Gill Boxes
(98) Rectilinear Combs
(99) Draw Frame/Roving Frame/Automatic Rubbing Frame/Bobbiners/Finishers, for use in woollen textile industry
(100) Ring frames from 60 MM Ring Dia and above, for use in woollen textile industry
(101) Ring Frames with Siro Sp- inning attachment / Auto Doffers having maximum 75 MM Ring Dia, for use in woollen textile industry
(102) Shearing, polishing and cropping machines
(103) Step cleaner
(104)Flax hackling machine
(105) Drawing machine for Flax
(106)Roving machine for Flax
(107) Wet ring frame for Flax
(108) Auto winding machine for Flax
(109) Continuous spinning machines for Viscose Filament Yarn.
(110)Digital electronic frequency inverters for spinning machines including control boards
(111) Finishing oil metering pumps with relevant feed system
(112) Metering gear pumps for Viscose
(113) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel
(114) Precious metal spinnerettes including distribution plates (pre- spinnerette)
(115) Spin bath degassinag plant by flash evaporation
(116) Spin bath backwash filtration system with candle filters
(117) Continuous dissolving and homogenisisng system for viscose preparation
(118) Contidisk filters for viscose
(119) Spinbath heat exchanger in graphite
 

(1)Effluent treatment unit with biopaq reactor, activate sludge process, activated carbon, ultrafiltration ozonisation facilities
(2)Combined contipress/decatising machine
(3) Effluent treatment unit with automatic sensing devices, automatic controlled chemical dosing, dissolved air floatation (DAF), reverse osmosis, sludge dewatering, decanters, ultrafilters, vacuum filters to deliver water for reuse.
(4)Hydraulic Flat Paper Press/continuous Hydraulic Flat paper Press/Rotary Press
(5)Fully fashioned high speed knitting machine
(6)Computerised Pattern maker/ Pattern grading/marker
(7) Computerised embroidery pattern- making machine with plotter
(8) High Speed Warping machine with yarn tensioning, pneumatic suction devices and accessories
(9)Shuttleless loom (air jet, water jet, rapier and projectile and narrow width high speed needle)
(10) Beam knotting machine
(11) Auto control type humidification plant
(12) Carding Sets, for use in woollen textile industry.
(13) Yarn/ Fabric mercerising machine
(14) Continuous bleaching plant
(15) OMITTED
(16) Wet fabric spreading and squeezing machine
(17) Relax drum/conveyer drying machine
(i) Drying range
(ii) Float dryer
(iii) Loop dryer
(iv) Drum dryer
(v) Jet dryer
(vi) Rapid dryer
(18) Compacting Machine
(19) Computer controlled HTHP yarn dyeing machine
(20) Soft package winders (dye package winders)
(21) Automatic dye weighing and dispensing system
(22) Open width Tubular inspection machine
(23) Fastness testing equipment
(24) Shrinkage testing equipment
(25) Indigo dyeing range with/without sizing plant
(26) Computer colour matching equipment
(27) High speed computer control padding mangle
(28) Powder dot coating machine
(29) Laser engraver or inkjet engraver
(30) Pre-shrinking range for flat and Knitted goods
(31) Knit-tubular mercerising or bleaching-cum-mercerising machine
(32) Auto flame controlled, width controlled singeing machine for flat and Knitted fabrics
(33) Milling and scouring machine
(34) Shearing and Polishing machine
(35) Kier Decatising/Decatising machine
(36) Combined Contripress / Decatising machine
(37) Auto fabric detwister
(38) Rotary/Flat bed screen printing machine
(39) Curing/Polymerising machine
(40) Continuous rope/open width washing machine
(41) Open width continuous dyeing range
(42) Soft flow dyeing machine
(43) Jet dyeing machine
 

(1) Automatic reeling machinery for reeling of silk consisting of continuous hot air drier(conveyer type), continuous cocoon boiling machine(conveyer type) and automatic reeling machine with re-reeling
(2) Silk weaving and twisting machines consisting of hank-to-bobbin cone winders, silk doubling machine,and Electronic jacquard weft knitting machine
(3) Arm dyeing machine for hank degumming dyeing
(4) Hank dryers (continuous type)
(5) Silk felt calender
(6) Clip stenter
(7) Silk calender
(8) Silk decasting machine
(9) Overflow machine for silk fabric dyeing
(10) Cone-chees degumming and dyeing machine
(11) Beam dyeing machine for silk fabric
(12) Semi-automatic screen printing machine
(13) Loop agers
(14) Design studio equipment
(15) Colour kitchen equipment
(16) Colour matching computer
 

(1) Machinery for coffee plantation sector, namely:-
 

(i) Coffee grinder intended for industrial use, falling under tariff item 8479 82 00
(ii) Coffee roasting machine intended for industrial use, falling under tariff item 8516 79 90
(iii) Power weeding machine, falling under tariff item 8433 11 90
(iv) Coffee processing machine (pulping, cleaning, sorting & grading), falling under sub-heading 8433 60
(v) Sprayer, falling under tariff item 8424 81 00 ;
 

(2) Machinery for tea plantation sector, namely:-
 

(i) Tea bagging machine, falling under tariff item 8422 30 00
(ii) Tea packaging machine, falling under tariff item 8422 30 00
(iii) Color sorting machine, falling under sub-heading 8433 60
(iv) Tea leaf cutting-rolling machine, falling under tariff item 8438 80 40
(v) Mechanical harvester, falling under tariff item 8433 59 00
(vi) Tea pruning machine, falling under tariff item 8201 60 00
(vii) Mist blower, falling under tariff item 8414 59 20
(viii) Sprayer, falling under tariff item 8424 81 00;
 

(3) Machinery for rubber plantation sector, namely:-
 

(i) Slab cutter, falling under tariff item 8477 80 90
(ii) Shredder, falling under tariff item 8477 80 90
(iii) Solid pump vibrating screen, falling under tariff item 8413 70 96
(iv) Plastimeter/PRI ageing oven, falling under tariff item 8514 10 00
(v) Mooney viscometer, falling under tariff item 9027 80 10
(vi) Latex centrifuge, falling under tariff item 8421 11 00
(vii) Mechanical stability time apparatus, falling under tariff item 9024 80 99".
 

(In List 32A item 1, 3 has been substituted vide CUS NTF NO. 11/2005 DATE 01/03/2005)
 

(1) Connecting rod assembly
(2) Crank 1,2 and 3
(3) Piston ring set
(4) Coil ignition
(5) Ignition coil assembly
(6) Pin piston
(7) Rod connecting
(8) Pin crank
(9) Gear adjustment
(10) Lever tilt 2
(11) Handle gear shift
(12) Carburettor assembly
(13) Pinion
(14) Shift can assembly
(15) Lower casing assembly
(16) Propeller assembly
(17) Reed valve assembly
(18) Crank shaft assembly
(19) Fuel pump assembly
(20) Cowling bottom
 

(1) Air blast dust removing machine
(2) All types of staking machines except slocum (slow combing process)
(3) Automatic Drying machine
(4) Automatic Lacing machine
(5) Automatic Leather Perforating and/or Punching machine
(6) Automatic Lock-Stitching Cylinder Bed Bartacker
(7) Automatic machine to control, to slant and to glue leather straps
(8) Automatic Milling machine
(9) Automatic Milling-Boring Machine
(10) Automatic or semi-automatic hydraulic press (750 tonnes or more)
(11) Automatic Padding machine
(12) Automatic Spraying machine
(13) Automatic Tacks - Reinforce machine
(14) Automatic Work Unit for assembling the complete Insole
(15) Back Part Moulding machine
(16) Band-saw with or without Flier
(17) Bandknife Splitting machine
(18) Belt Punching and cutting machine
(19) Bobbin machine with counter
(20) Boot leg ironing machine
(21) Bottom Leather Grain Crack Tester
(22) Bottom roughing and/or scouring machine
(23) Box Stamping machine
(24) Buckle Stappling machine
(25) Button Hole (Eyelets end) machine
(26) Button Sewing machine
(27) Button stitch / Sewing machine
(28) Cementing machine
(29) Cementing machine and cementing gun
(30) Chain Slotting machine
(31) Channel Closing machine
(32) Channelling and Grooving machine
(33) Clicking Board levelling machine
(34) Clicking machine
(35) Clicking Machine Hydraulic (Bottom)
(36) Coloriemeter
(37) Column Boring machine
(38) Computerised Sewing Machine
(39) Computerised Skiving machine
(40) Conveyor system
(41) Counter Cementing Machine
(42) Counter Moulding machine
(43) Counter Tightening machine
(44) Coupling and edge pre- trimming machine
(45) Crimping machine
(46) Crumpling and embossing machine
(47) Curtain coating machine
(48) Cylinder Bed Sewing machine
(49) Die Bending machine
(50) Double Band Cleaning machine
(51) Dust removing machine- pneumatic/hydraulic
(52) Dyeing machine
(53) Edge buffing machine
(54) Edge Inking machine
(55) Edge Pre-Trimming machine
(56) Edge Setting machine
(57) Edge Trimming machine
(58) Elastic inserting machine on variety of garments
(59) Electrical machine for cutting and slanting straps
(60) Electro pneumatic weaving machine for leather
(61) Electronic skin assessor
(62) Embossing Plates for Press for leather printing
(63) Engraved rollers for Press for leather printing
(64) Evening and Roughing machine for Soles and Insolses
(65) Fibre Board Flexing machine
(66) Fine Turn machines for Lasts
(67) Finish Sheet Resistance Tester
(68) Finishing Machine for Lasts
(69) Fixed Head/Travailing Head Clicking Cutting machine
(70) Flat Bed Double Needle Sewing machine
(71) Flat Bed Single Needle Industrial Sewing machine with or without trimer
(72) Folding machine for brief cases and other leather products
(73) Folding machine for sides for Brief Case
(74) Forepart conditioning machine
(75) Frame Fixing/Frame Folding machine
(76) Fusing presses
(77) Halogen and Adhesive Application machine
(78) Hand Operated Press for Inserting Perforation Tubes and Prickers
(79) Heat Setting plant
(80) Heat transfer press
(81) Heel and Sole Brushing machine
(82) Heel and Sole Buffing machine
(83) Heel Attaching machine
(84) Heel Breast Cementing machine
(85) Heel breast roughing machine
(86) Heel Breasting machine
(87) Heel Building machine
(88) Heel Covering machine
(89) Heel Molder Flanger
(90) Heel Nailing machine
(91) Heel profiling machine
(92) Heel seat and side lasting machines
(93) Heel Seat Cement Lasting machine
(94) Heel Trimming / pretrimming / Cupping or combined machine
(95) High Speed Corner Stitching machine
(96) Hole punching machine
(97) Hot Melt Applicators
(98) Humidifier for Uppers
(99) Hydraulic / Pneumatic sammying and /or setting machine
(100) Hydraulic automatic plating ironing machine
(101) Hydraulic Bending machine
(102) Hydraulic Fleshing machine
(103) Hydraulic Ironing and Embossing Press
(104) Hydraulic Scudding machine
(105) Hydraulic Setting machine
(106) Hydraulic Shaving machine
(107) Hydraulic Shearing machine
(108) Hydraulic Splitting machine
(109) Hydraulic Sulphide applicator
(110) Injection Moulding of PVR/TPR/EVA Soles, Inserts and Half Soles
(111) Injection Moulding press to produce Plastic shoe Lasts
(112) Insole Attaching machine
(113) Insole Backpart Stiffener Tester
(114) Insole Bevelling machine
(115) Insole Covering machine
(116) Insole moulding machine
(117) Ironing and Conditioning machine
(118) Kamborian Lasting machine
(119) Knife Grinding machine
(120) Knife making equipment for cold steel and forged steel
(121) Label stitching machine
(122) Last Turning machine
(123) Lastometer
(124) Leather buffing machine
(125) Leather cover cutting machine for Heels
(126) Leather Polishing machine
(127) Leather rolling machine
(128) Lining roughing machine
(129) Lining Trimming machine
(130) Loop closing machine
(131) Loose / Nailing machine
(132) Manual loop cutter
(133) Mckay Stitching machine
(134) Milling machine for shoe Uppers
(135) Moccasin Lining Trimming machine
(136) Moccasin Performing machine
(137) Motorised hides and skins stamping machine
(138) Moulds for rubber sole direct vulcanising press and PVC direct injection soling machine
(139) Multiple Row Upper Chain Stitching machine i.e. 3 Rows and above
(140) Three Needles for Small Arm Cylinder machine for Multiple Row Stitching
(141) Outsole Stitching machine
(142) Paste drying unit
(143) Pattern binding machine
(144) Pattern corner cuting and binding machine
(145) Pattern Grading machine
(146) Pattern making machine
(147) Pattern Perforator
(148) Pattern Plan
(149) Pattern scanner
(150) Pattern Scanning machine
(151) Piping machine for trimming and embelishment fixing machine
(152) Plan Computer Controlled Nesting System
(153) Pneumatic Broaching machine
(154) Pneumatic control moulder machine for buckles
(155) Pneumatic fusing machine for ironing fusible interlining
(156) Polishing machine
(157) Polyshanking machine
(158) Polyurethane / PVC / TPR Sole, Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station)
(159) Pore part lasting machine
(160) Post Bed Double Needle Sewing machine
(161) Post Bed Single Needle Sewing machine
(162) Post Bed Single Needle under Edge Trimming
(163) Pounding or beating or ironing machine or combination of such machines
(164) Pre-lasting conditioner
(165) Preparing and polishing machine
(166) Pulling Over and Cement Lasting machine
(167) Pulling Over Machine
(168) Punches for model room
(169) Punches of all varieties
(170) Punching and / or eyeletting machine
(171) PVR/TU/EVA direct injection soling machine (DIP construction)
(172) Quilting machine
(173) Raised Cord Sewing machine
(174) Reactivating Plant for Shoe and Soles
(175) Recessing and Roughing Soles machine
(176) Recessing Welt machine
(177) Rotary Collection Unit
(178) Rotary Pigment Coating machine
(179) Rotary Printing machine
(180) Rough Turn machine for lasts
(181) Roughing machine for Plastic Blocks
(182) Roughing machinery for upper or soles or insoles
(183) Rubber sole direct vulcanising press (DVP construction)
(184) Satra Plan and Knife search
(185) Scissors Cutting machine for plate
(186) Scouring and Blending machine
(187) Screwing machine
(188) Seam Ironing machine
(189) Sectioning machine
(190) Sewing machine Cylinder Bed
(191) Sewing Machine for Ruffled Work and Genuine Mocassin
(192) Sewing Machine Zig Zag Flat Bed
(193) Shank / Sole / Counter reducing machine
(194) Shank Rivetting machine
(195) Shears for cutting pattern
(196) Shears for Iron Bars
(197) Side Lasting machine
(198) Sidewall Roughing machine
(199) Skiving machine
(200) Slike Fastener Fatigue Tester
(201) Snap fasteners fixing machine with or without dies therefor
(202) Sole / Heel / Seat Roughing machine
(203) Sole Edge Recessing / Shapping machine
(204) Sole Levelling machine
(205) Sole Stamping / Embossing machine
(206) Soling Material Abrasion machine
(207) Spiral Cutting machine/ Cutting Press
(208) Spray Booths
(209) Stamping machine for Upper / Lining / Socks
(210) Steam Toe Press
(211) Stich Marking machine
(212) Strap / Strip Cutting machine
(213) Strap Folding machine
(214) Stretching and drying machine with or without conveyor and toggles
(215) String Lasting machine
(216) Strobel type stitching machine
(217) Studs Attaching machine
(218) Suit Case Stitching machine
(219) Tack heel seat lasting machine
(220) Tack Lasting machine
(221) Tack Side lasting machine
(222) Tanning and colouring drums
(223) Tapping and seam rubbing machine
(224) Testing Equipments, namely :- Flexometer / Upper material flexing machine, Tensometer / Lastometer, Permeometer / Upper leather water proofness tester, Penetrometer / Bottom Leather water penetration machine, Finish rub fastness tester, Upper leather abrasion resistance machine, Dome plasticity apparatus, Finish fleat resistance tester, Adhesion of finish tester, Leather shrinkage temperature determination apparatus, Wrinklometer, Bottom Leather grain crack tester, Electronic moisture meter, Dyeing and fumbling machine for laboratory, fibre board flexing machine, State of cure apparatus, Ross Flexing machines, Soling materials abrasion machine, Heel fatigue tester, Heel impact tester, Centilever tensiometer, Viewing box for assessing visible damage, Slide fastener fatigue tester, Insole backparts stiffness tester, shoe flexing machine, Break / pipness scale, Sole Adhesion tester, Safety Footwear impact tester, Rapid tear tester, Needle holding jig, Shoe lace adhesion machine
(225) Thermo cementing and folding machine
(226) Toe Cap Applicator Thermoplastic
(227) Top Lift Slugging machine
(228) Transfer Arm
(229) Trimming/milling machine with or without polishing device
(230) Twin Needle, needle feedlock stitch sewing machine
(231) Twin Sole Attaching machine
(232) Two Needle Lock Stitching machine
(233) Unlasting machine
(234) Upper Cementing machine
(235) Upper Edge Inking machine
(236) Upper Embossing machine
(237) Upper Folding machine
(238) Upper Forming machine
(239) Upper Perforating machine
(240) Upper Reinforcing machine
(241) Upper Seam Rubbing / Beating machine
(242) Vaccum Drying machine
(243) Vaccum forming machine for last with vaccum pump
(244) Vice for holding pattern
(245) Vision Lasting System for Toe Lasting machine
(246) Vulcanizing Press
(247) Welt (Rand) Attaching machine
(248) Aquamix for use in Tanning industry
(249) Prodomix for use in Tanning industry
(250) Microtan / Computan for use in Tanning industry
(251) Pneumatic press for engraving and marking
(252) Pneumatic staple gun for stapling insoles, heels and uppers
(253) Stapling machine for lows to upper on leather shoes
(254) Lighting assessment cabinet (for checking colour under different light conditions)
(255) CAD/CAM equipment for shoe desgining and pattern engineering including software
(256) Bistep cutting machine
(257) Spiking machine
(258) Airhood with grinder
(259) Sock liner press
(260) Box folding machine
(261) Outsole plates
(262) Dust collector systems
(263) Shoe box making machine
(264) Splitting machine (fitted with electronic and computer devices,etc.)
(265) Moulds for footwear
(266) Colouring/painting machines for soles and heels
(267) High frequency welding/cutting machines for uppers and insoles
(268) Degreasing/ cleaning machine for polyurethane soles
(269) Strap fitting machine
(270) R P box strapping machine
(271) Dies for canvas shoes
(272) Dies for soles and straps for footwear

(List 34 has been substituted vide CUS NTF NO. 11/2005 DATE 01/03/2005)
 

(A) Wireless Apparatus and accessories -
(1) HF, VHF, or UHF transreceiver (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form
(2) VHF/VHF or VHF/UHF Repeater (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or kit form
(3) Transvertor for amateur frequencies in assembled or kit form
(4) Grid Dip Oscillator, Radio Frequency Interference Filter, Balun Transformer, SWR bridge or reflectometer, Morse reader or Noise bridge
(5) Antenna with or without feeders/Antenna rotators for amateur frequencies
(6) Digital Frequency counter (upto 600 MHz) with accessories
(B) Parts -
(1) Transistors, diodes, integrated circuits/ chips, thermionic valves or vaccum tubes
(2) Toroidal cores, quartz crystals, relays, rotatory switches, ferrite beads
(3) Variable condensers, air- dielectric type
(4) Precision capacitors (fixed type) value (s) between 1pF to 5000 pF
(5) Spare nicad cells or pack, as required or used with thermionic valves or vaccum tubes or toroidal cores (in the case of hand held transreceiver)
(6) Slow motion tuning mechanism with or without dials.
 

(List 36 has been omitted vide CUS NTF NO. 26/2003 DATE 01/03/2003)
 

(1) Australia Antigen RIA kit
(2) Cardiac catheters with guidewires; Coronary Stents and coronary stent systems for use with cardiac catheters
(3) Clips for aneurysms and clips applying forceps in Neuro-Surgery
(4) Cardio vascular sutures, including sternum steel sutures
(5) Cardiovascular special instruments, namely:-
(i) Coronary perfusion cannulae
(ii) Electrical or gas operated sternal cutter
(iii) High pressure stop cocks and connectors for pressure recording
(iv) Vascular bull-dog clamps
(v) Vascular clamps
(vi) Vascular needle holders
(vii) Vascular scissors straight or angled
(viii) Vascular tissue forceps
(6) Compressed air breathing apparatus complete
(7) D.C. Defibrillators for internal use and pace makers
(8) Laryngeal Mask / Endotracheal Tube
(9) Haemodialysors
(10) Heart lung machine
(11) Heart valve prothesis including valve frames
(12) Nebulized humidifier
(13) Hydrocephalus shunts
(14) Hyper-baric oxygen chamber
(15) Fogarty and embolectomy catheters
(16) Implantable cardiac pacemakers
(17) Intra-arterial catheters and guidewires and material for intervention radiology
(18) Intra-cardiac patches
(19) Nebulizers (excluding ultrasonic nebulizers and heat nebulizers)
(20) Omayya reservoirs for intraventicular investigation / therapy
(21) Operating sets for Percutaneous Nephrostomy and Percutaneous removal of kidney stones with continuous irrigation and suction with ultrasonic Lithotrite, etc.
(22) Ostomy products (Appliances) for managing Colostomy, Illcostomy, Ureterostomy, Illeal Conduit Urostomy Stoma cases such as bags, belts, adhesives seals or discs or rolls adhesive remover, skin barriers micropore surgical tapes, bag closing clamps karaya seals paste or powder, irrigation sets, plastic or rubber faceplates, flanges, male or female urinary incontinency sets, skin gels, in parts or sets
(23) Oxygenator
(24) Plastic disposable 3-way connectors
(25) Portable intermittent positive, pressure breathing apparatus
(26) Pulmoflator
(27) Respirators including ventimeters
(28) Sengstaken tubes
(29) Tracheostomy tubes
(30) Ventilator used with anaesthesia apparatus
(31) Vascular grafts
(32) Tracheostomy tube of plain PVC, Low pressure PVC, Red Rubber Plain, and Red Rubber cuffed
(33) Various types of Cardiac Catheters including balloon tipped, double Lumen and PTCA catheters, balloon dilatation catheters and Endomyocardial biopsy forceps
(34) Disposable and non-disposable cannula for aorta, vena cavae and similar veins and blood vessels and cannula for intra-corporal spaces
(35) Programmer for pacemaker
(36) Ancillaries for blood component therapy required for the treatment of cancer, namely, Y type blood solution recipient set, Transfer pack 1000 ml. and 300 ml., disposable pherasis bowl 225 ml. and 373 ml., wasting harness with bypass, and waste bags
(37) AIDS (Acquired Immune Deficiency Syndrome) test kits, Enhanced luminescene analysers for AIDS, Hepatitis and other Analyses
(38) Iridium wire
(39) Anti-HLA sera (AB-CDR)
(40) T.P.H.A. Kits and AIDS diagnostic kits
(41) Gamma knife
(42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy
(43) Cell Separator
(44) Pressure Transducer and Pressure Amplifier
(45) Cell Saver
(46) Craniotome (Pneumatic and Electric Equipment) and Drills
(47) Binocular Loupes
(48) Intra Aortic Balloon Pump
(49) Remote After Loading Brachy Therapy Equipment
(51) Dosimetry System
(52) Cell Saver Equipment
(53) Cell Washer
(54) Thawer Equipment for Blood Warming
(55) Mammography Unit
(56) O2Concentrator
(57) Ventricular Assist Device
(58) Pace Maker
(59) Activated Clot Time Machine
(60) Cobalt Therapy Unit
(61) Colour Doppler Ultrasound Scanner
(62) SPECT Gamma Camera
(63) Deep Therapy Unit
(64) Cardiac and Vascular Angiography System including Digital substraction Angiography
(65) Pulse Oximeter
(66) Blood Gas Analyser (including cartridges, if any), Sodium Potassium Analyser, Auto Analyser for enzymes, drug levels and bio- chemical investigations, or a combination of two or more of the aforesaid
(67) Ultrasonic Surgical Aspirator
(68) Intra Cranial Pressure Monitoring Equipment
(69) Radio Therapy Simulator
(70) Treatment Planning System
(71) Angiography Contrast Agent
(72) Image Intensifier
(73) Magnetic Resonance Imaging System
(74) Surgical Laser
(75) Electro Hydraulic Operating Table for Cardio Throacic and Neuro Surgery
(76) Implants for pain relief and bladder control
(77) Artificial electronics larynx instruments
(78) Ventilators other than those used with anaesthesia
(79) Digital Video EEG System
(80) OMITTED
(81) Small portable pumps used for giving slow infusion of anti-cancer drugs or thalassaemic drugs
(82) Fibre optic endoscopes including , Paediatric resectoscope / audit resectoscope, Peritoneoscopes, Arthoscope, Microlaryngoscope, Fibreoptic Flexible Nasal Pharyngo Bronchoscope, Fibreoptic Flexible Laryngo Brochoscope , Video Laryngo Brochoscope and Video Oesophago Gastroscope, Stroboscope, Fibreoptic Flexible Oesophago Gastroscope.
(83) Cardiac electrophysiology system, stimulator and Radio Frequency (RF) Generator
(84) Fully Implantable and programmable Infusion Pump
(85) Neuro Stimulation Systems for pain management
(86) Devices and accessories for beating heart surgery (Tissue stabilizer and heart positioner)
(87) Micro-Electrode Recording System for deep brain stimulation surgery
(88) Cardiac Ablation System including Radio frequency ablation system
(89) Ruthenium-106 Ophthalmic Applicator
(90) Neuro Stimulator and therapy controller for tremor control therapy
(91) Image Guidance System for neurosurgery (during operation)
(92) Helical/Spiral C.T. Scanner with or without Laser Camera (93) Centrifugal Pump for Extra Corporeal System
(94) Automated blood culture/bacteriological identification and susceptibility systems (including that for mycobacterium tuberculosis)
(95) Peripheral Stents (flexible bridge stents including iliac stent, renal stent, aortic stent)
(96) Activated Clotting time Cartridges
(97) Insulin Pump
(98) Intra Coronary Shunts
(99) Positron emission tomography (PET)
(100) PEC-CT combined
(101) Medical cyclotron
(102) Urine chemistry analyzer
(103) Radio frequency lesion generator (Neurogenerator) for stereotactic brain lesioning for functional neurosurgery
(104) Teletherapy (Radiotherapy) simulator machine
(105) Automated PCR analyzer system for detection and monitoring of HIV viral load (PCR Kits)
(106) Flow cytometer hematology analyzer for CD4 count
(107) I. V. Line Filters
(108) Multi-slice/EBT CT scan
(109) Leucocyte and platelets depletion filters for thalassaemia patients
(110) Rapid diagnostic kit for detecting infection with malarial parasite
(111) Linear accelerator

 

Ophthalmic equipment, namely :-
(1) Ophthalmoscope-Direct/Indirect
(2) Ophthalmic/Xenon Arc
(3) Flurescein Angiography Equipment including Fundus Camera
(4) Ultrasonic Equipment (A scan/ Pacchy meter)
(5) Microsurgical needles, cannulas, blades, trephine blades, membrane peelers, diathermy probes, vitreous cutters, atraumatic needles and sutures, intraocular scissors and forceps
(6) Tonometer (Schiotz/ Applanation / Pneumo)
(7) Retinoscope streak/ spot
(8) Operating glasses (2X, 4X, 6X)/ Binomag
(9) Gonioscope, 3 mirror lens, special lenses for laser delivery, special diagnostic lenses (14D, 20D, 90D), Endo lens
(10) Sterilisers (high speed / ethylene)
(11) Specular microscope with monitor and recorder
(12) Intraocular lenses/ Keratoprosthesis / orbital implants
(13) Diathermy equipment
(14) Synoptophore
(15) Silicone Sponges/ rubber / bands, for Retinal Detachment Surgery
(16) Vitrectomy equipment
(17) Phaco-emulsification system
(18) Visual field recording equipment
(19) Ocular electro physiological testing equipment [Electroretinography / Electroculography / Visually evoked response equipment (ERG/EOG and VER)]
(20) Keratometer / Automatic Keratometer
(21) Prism bars
(22) Laser Interferometer
(23) Pacchymeter - optical / electronic
(24) Aspiration - irrigation equipment
(25) Automatic refractometer or lensometer / projection lensometer or a combination of the aforesaid
(26) Complete refraction unit with phoropter / projection - chart
(27) Ophthalmic hydraulic chair
(28) Low visual aids and sets (telescopic glasses)
(29) Colour vision testing equipment
(30) Photoelectric keratoscope and thermokeratoscope
(31) Pseudo-isochromatic chart book / Ishiare
(32) Slit lamp biomicroscope / photo slit lamp
(33) Surgical operating zoom microscope with closed circuit TV camera
(34) Surgical operating microscope manual
(35) Argon / krypton laser
(36) Yag laser, excimer laser or diode laser
(37) Ultrasonic bi-microscope
(38) Confocal microscope
(39) AB scan
(40) Corneal topographic machine
(41) Perimeter automated
(42) Non contact tonometer
(43) Nerve fibre layer analyzer
(44) Fundus fluorescein angiography machine (digital with videography)
(45) Optical coherence tomography machine
(46) Photo dynamic therapy-laser
(47) Transpupillary thermo therapy laser

 

ENT equipment, namely :-
(1) Otoscope
(2) Impedance Audiometer
(3) BERA (Brain Evoked Response Audiometry)
(4) Speech Audiometer
(5) Surgical Operating Microscope
(6) Fresnel’s glasses
(7) Magnifying Operating Glasses (Magnifying Loupes)
(8) Microsurgical instruments for all Ear surgeries
(9) Sialistic sheet used for Tympanoplasty operations
(10) Sinoscopes 0 0 , 30 0 , 70 0 , 120 0 (2.6 mm and 4 mm diameter)
(11) Instruments for Endoscopic Sinus Surgery
(12) CCD Camera, Monitor, VCR to fit with Sinoscopes
(13) Cochlear Implants and equipment for performing Cochlear
(14) Voice Prostheses
(15) Blom Singer Voice Prostheses
(16) Electronic Larynx
(17) Sigel’s Speculum
(18) Microlaryngeal instruments
(19) Video Processor
(20) Video Cassette Recorders used along with the Video Endoscope
(21) ENT Burrs
 

(1) 12 (+/- 1) mm Laparoscope (Single incision)
(2) Falope Ring - applicator single incision (for two rings) and procedure instruction manual, kit containing guide and loader and cleaning brush
(3) 12 (+/- 1) mm Trocar (including piston type) with spare washers for sleeve and canulae and cleaning brush
(4) Fibre Optic Light Cable
(5) Bulbs, fuse lamps, Adapter for Fibre Optic Light Cable/Laparoscope
(6) Carbondioxide (CO2) cylinder with pneumoperitoneum apparatus
(7) Light Source
(8) Machine for Gas Insufflator with Gas Tubing Spare Carbondioxide (CO2) Hose Pipe and a Gauge
(9) Dual incision applicator Two rings
(10) Trocal and Cannula 6-8 mm with valves gas stopcock
(11) Probe 34-37 cm
(12) Verres Needle (4”and 5 1 /2”)
(13) Minilight source with accessories consisting of :-
(a) 6 volts rechargeable battery
(b) AC battery charger
(c) AC power supplier 220 volts
(d) Inter-connection assembly
(e) Convertor
(14) Falope Rings
(15) 6-8 mm Laparoscope (double puncture)
(16) Scissors 34-37 cm
(17) Suction Cannula 34-37 cm
Notes:-
(A) Item Nos.(6), (7) and (8) may be imported separately or in combinations as dual control assembly.
(B) Item Nos. (1) and (2) may be separate or in combination, when in combination, it is called Laparocator.
 

(A) (1) Braille writers and braille writing instruments
(2) Hand writing equipment Braille Frames, Slates, Writing Guides, Script Writing Guides, Styli, Braille Erasers
(3) Canes, Electronic aids like the Sonic Guide
(4) Optical, Environmental Sensors
(5) Arithmetic aids like the Taylor Frame (arithmetic and algebra types), Cubarythm, Speaking or Braille calculator
(6) Geometrical aids like combined Graph and Mathematical Demonstration Board, Braille Protractors, Scales, Compasses and Spar Wheels
(7) Electronic measuring equipment, such as calipers, micrometers, comparators, gauges, gauge blocks Levels, Rules, Rulers and Yardsticks
(8) Drafting, Drawing aids, tactile displays
(9) Specially adapted clocks and watches
(B) (1) Orthopaedic appliances falling under heading No.90.21 of the First Schedule
(2) Wheel chairs falling under heading No. 87.13 of the First Schedule
(C) Artificial electronic larynx and spares thereof
(D) Artificial electronic ear (Cochlear implant)

(E)

(1) Talking books (in the form of cassettes, discs or other sound reproductions) and large-print books, braille embossers, talking calculators, talking thermometers

(2) Equipment for the mechanical or the computerized production of braille and recorded material such as braille computer terminals and displays, electronic braille, transfer and pressing machines and stereo typing machines

(3) Braille paper for the production of braille books

(4) All tangible appliances including articles, instruments, apparatus, specially designed for use by the blind

(5) Aids for improving mobility of the blind such as electronic orientation and obstacle detection appliance and white canes

(6) Technical aids for education, rehabilitation, vocational training and employment of the blind such as braille typewriters, braille watches, teaching and learning aids, games and other instruments and vocational aids specifically adapted for use of the blind

(7) Assistive listening devices, audiometers

(8) External catheters, special jelly cushions to prevent bed sores, stair lift, urine collection bags

(9) Instruments and implants for severely physically handicapped patients and joints replacement and spinal instruments and implants including bone cement

 

(List 42 has been omitted vide CUS NTF NO. 26/2003 DATE 01/03/2003)
 

1. Tarapur Atomic Power Plants –3 and 4 (Maharashtra) – 1000 MW
2. Kudankulam (Tamil Nadu) – 2000 MW
3. Kaiga – 3 and 4 (Karnataka) – 440 MW
4. Rajasthan Atomic Power Project- Units 5 and 6 (Rawatbhata) - 440 MW
5. Prototype Fast Breeder Reactor (Kalpakkam) –500 MW.
 

1. 765 KV Transformers;
2. 765 KV Reactor;
3. 765 KV Circuit Breaker;
4. 765 KV Isolators;
5. 765 KV Current Transformer;
6. 765 KV Capacity Voltage Transformer;
7. 765 KV Surge Arrestors;
8. INVAR/ACSS Conductor for high temperature application;
9. Polymer Long Rod Insulators;
10. Emergency Restoration System (ERS) for extra-high voltage transmission Line;
11. Overhead Optical Ground Wire (OPGW), including hardware and accessories such as Vibration Damper, Joint Box, Suspension and tenslon clamps;
12. High Voltage DC Divider and CT;
13. High Voltage DC Reactor;
14. High TRV Circuit Breaker for High Voltage DC application;
15. Protective Spark Gap and Damping Equipment for Thyristor Controlled Series Compensator (TCSC)/ Fixed Series Compensator (FSC);
16. Thyristor Controlled Series Compensator (TCSC)/ Fixed Series Compensator (FSC) MOV for Series Compensation;
17. Optical Current Transformer;
18. 400 KV Extra High Voltage Cables;
19. Gas Insulated Switchgear equipment for 220 KV and above;
20. Thermo Vision Camera;
21. On-line Puncture insulator detector;
22. Hot line Kits and Tools for transmission line live maintenance;
23. Hot line washing equipment for insulators.
 

Textile machinery for man-made fibre and yarn industry:-
(1) Machinery for continuous polymerization plant:
(a) Polymerizing equipment, including esterification reactor, vapor separator, pre-polymerization reactor, polymerization reactor, static mixers, polymer pumps and automatic chipping system; pre-polyester pumps, spray condensers, probe assemblies, vacuum pumps, vacuum equipment such as ejectors, jacketed valves and jacketed control valves, pre-poly filters, mechanical seals and cooling system of polymerization reactors
(b) Slurry and additive preparation system, such as high shear agitators, mill feed pumps, filters and injection systems for additive and slurry pumps

(c) HTM (Heat Transfer Medium) and heating system; HTM pumps
(d) PTA conveying system, including container unloading platform and rotary feeders;
(e) Polymer transfer line equipment, including polymer coolers and jacketed polymer pumps; tandem drives on-line master batch and additive injection system
(f) Solid state polymerization equipment, including pre-crystalliser, crystalliser and rotary feeders;
(g) Process control equipment, including viscosity measuring equipment (Viscometer) and, Distributed control system;
(h) Atomic absorption spectrometer, X-ray fluorescence spectrometer;
(i) Extraction tower with accessories like centrifugal dehydrator and blower;
(j) Chip conveying system and accessories like blowers, filters and rotary and screw feeders;
(k) Solid State polymerization system including blowers and nitrogen plant;
(l) Crushing and melting system for caprolactum;
(m) V.K. Tube;
(n) Screw Feeder;
(o) Centrifugal dehydrator;
(p) Drying Tower;
(q) Circulating Blower;
(r) Fuel Oil Bowler;

(2) Machinery for synthetic fibre plant
(a) Spinning equipment, including manifold spinning beams, pre-heating ovens and finish applicators;
(b) Polymer transfer line, including extruder, color blender and continuous polymer filter (CPF); polymer valves
(c) Draw-off equipment, including take-up equipment, thread cutters and aspirators, spin defect detectors, draw off unit, tow guide equipment, lace-up or suction gun and tow suction unit; traversing unit
(d) Draw line (Fibre line), including creel, tow guide stand, draw frames, drawing bath, heat set calender/thermosetting/annealer unit, tow assembler, draw-off unit, tensiometer roll, steam box, crimping machine, spray box, tow guide system, cable dryer, tow cutter and grinding machine and tow cutter reels;
(e) Hydraulic baling press, strapping machine, dock levelers and automatic bale handling equipment;
(f) Process control equipment, including precision anemometer, thermo-hygrograph, aspiration psychrometer, ultrasonic cleaning unit, spinneret inspection system, infrared pyrometer, optical temperature measuring instrument; pack cleaning equipment with hydrolysis and vacuum pryolysism and pack press
(g) Textile laboratory equipment for fibre testing, including favimat, fafegraph HR, coring machine, stereo microscope, crimper tester, fibre shrinkage tester, refractometer, conductivity meter;
(3) Machinery for synthetic filament yarn plant
(a) Spinning equipment, including manifold, spinning beams and pre-heating ovens;
(b) Polymer transfer line, including extruder, color blender and continuous polymer filter (CPF);
(c) Take-up equipment, including take-up frames, oil application unit, godet rollers, yarn guides, thread cutters and aspirators, lace-up/suction gun, take-up and draw winders;
(d) Packing and automation equipment, including automatic doffers, automatic bobbin storage and handling system;
(e) Draw texturising machine, including creel, intermingling jets, ceramic guides, doffers;
(f) Textile laboratory equipment for yarn testing, including automatic tensile tester, projection microscope, denier skein reel, entanglement tester, denier auto count, dynafil, uster tester, online finish checking instrument.
(4) Other capital goods for synthetic fibre/yarn industry:
(a) Spin draw winding machine;
(b) Spindles;
(c) Yarn guides;
(d) PSM Rings;
(e) Ballon Control Rings;
(f) Travellers;
(g) Extruders;
(h) Extruder barrel;
(i) Online filamentation detector;
(5) Machinery for Regular/HWM Viscose Staple Fibre Plant:
(a) Sintered Filer Media;
(b) Automatic High Speed centrifugal separator;
(c) Fibre production lines;
(d) Fibre Cutter;
(e) Fibre Dryer;
(f) Pneumatic Fiber Fidders;
(g) Baling Press;
(h) Plate Heat exchanger;
(i) Graphite heat exchanger;
(j) Neno filtration plant;
(6) Machinery for Lyocell Fiber Plant:
(a) High viscosity handling equipment including pulper;
(b) Reactor for cellulose dissolution;
(c) Thin film evaporator with accessories;
(d) Spinning module;
(e) Air quenching systems and associated control systems;
(f) Fiber washing and treatment machines;
(g) Baling Press;
(7) Process and quality control equipment for artificial man-made cellulosic fibre/yarn industry:
(a) Robotic Fiber sampler;
(b) Spectrophotometers for fiber color evaluation;
(c) Automatic absorption spectrophotometer;
(d) X-ray phloroscence spectrometer;
(e) Automated oil pick up analyzer;
(f) Automated titrator;
(g) Textile laboratory equipment for testing of fiber properties such as denier, tenacity, elongaton, spinning fault, UV value and microscope with fibre imaging system;
(8) OMITTED
(9) OMITTED
(10) Machinery for Viscose Rayon Filament Yarn/ Rayon Tyre Yarn:
(a) Twin rolls press;
(b) Ageing Drum Hopper;
(c) Blowers and Fans for Alkali Cellulose Transport system;
(d) Slorry Pumps including VFDs;
(e) Automatic Pulp handling system;
(f) Simplex/Churn;
(g) Plate and Frame Filter Press;
(h) Viscose Pumps (Gear/Screw Pumps including VFDs);
(i) Evaporator;
(j) Heat Exchager- Hastalloy Plate and Frame Type;
(k) Crystallizer;
(l) Vacuum System - Ejectors, Boosters, Vacuum Pump and Vacuum Filter;
(m) Auto bagging and weighing system;
(n) Sand Filters;
(o) Centrifugal Pumps including VFDs;
(p) Pot Spinning Machine;
(q) Spinning Pots and Pot Motors;
(r) Metering Gear Pumps for Viscose;
(s) Automatic cake wrapping system;
(t) Air Splicer for Knotting Yarn;
(u) Automation for Cone Weighing and Cone Doffing;
(v) Auto Cone Packing and Palletizing;
(w) Environment Monitoring like Gas Monitors for Carbon-di-Sulfide (CS2), Hydrogen Sulfide (H2S) Sulfur Dioxide (SO2);
(x) BOD and COD Monitors;
(y) Textile Laboratory Equipment for Yarn testing namely, Universal Computerised automatic Tensile Tester and Denier Tester;
(z) Gas Chromatography and Mass Spectrometer.

(11) Other machinery for man made fibre and yarn industry:

 

(i) Pulp slurry with automatic slurry control systems
(ii) Alkali Cellulose Cooler-Fluidized with automatic temperature control
(iii) Press Lye Filter
(iv) Xanthator with automation
(v) Rough and Fine Grinders for Viscose
(vi) Viscose Filters
(vii) Viscose deaerators
(viii) Color slurry injection pumps
(ix) Slurry homogeniser system
(x) After treatment line for washing fibre, conveying of fibre and chemical treatment
(xi) After treatment chemicals filtration system
(xii) Pneumatic fibre squeezing system
(xiii) Wet fibre opener
(xiv) Dry fibre opener
(xv) Online fibre contamination and removal system
(xvi) Automatic bale handling system
(xvii) Bale inspection system
(xviii) Automatic candle filters for spin bath filtration
(xix) Dry condensing system for low pressure vapour removal in evaporators, crystallisers and viscose deaerators
(xx) Low temperature multi effect distillation (LT-MED) system and mechanical vapour compression for effluent treatment by water desalination process

(xxi) Electrical protecting devices and relays falling under tariff item 8536 49 00
(xxii) Flame proof motors falling under tariff item 8536 90 90
(xxiii) Process monitoring and control equipment falling under tariff item 8538 10 10
(xxiv) Distributed control system falling under tariff item 8537 10 10
(xxv) Precision gear pumps for highly viscous polymers
(xxvi) Hydraulic screen changing type continuous filters for viscous polymers
(xxvii) Static mixers for high viscosity polymers
(xxviii) High pressure stainless steel micro spinnerettes (less than 80 micron hole size) for high viscosity polymers

(xxix) High efficiency fibre dryer for Iyocell fibres
(xxx) High capacity fibre openers suited for Iyocell fibres
(xxxi) Solvent purification system including ion exchange and membrane based systems falling under tariff item 8445 19 30

(xxxii) Energy efficient multi staged evaporators/distillation columns for solvent recovery falling under tariff item 8445 19 30

(xxxiii) Open end spinning machine
(xxxiv) Autoconer
(xxxv) Uster Tensorapid
(xxxvi) Positive rapier loom
(xxxvii) Jacquard

 

(A) Sewing machines with in-built motors, falling under tariff item 8452 29 00
(B) Machinery for garment sector, namely:-
 

(1) Garment sand blasting or brushing machine;
(2) Hook and bar machine;
(3) Hydro-extractor machine;
(4) Garment washing machine falling under tariff item 8450 20 00;
(5) Waistband attaching machine;
(6) Label or tag inserting machine;
(7) Profile cutting machine
(8) End cutter with cloth press track;
(9) Collar point trimmer/gear knotcher machine;
(10) Laser colour fading/marking/drawing machine;
(11) Laser operated colour spraying machine for garments;
(12) Needle detector machine;
(13) Fusing machine;
(14) Fabric laying machine;
(15) Computerised cutting machine

 

(C) Machinery for manufacture of technical textiles, namely:-
 

(1) Precision coating heads
(2) Turret winder and unwinders
(3) Coating equipment for scrim fabrics
(4) Multi-colour roto gravure printing machine for coated fabrics
(5) Printing equipment for sineage for coated or laminated fabrics
(6) Grommet fixing machine
(7) Ultra sonic, hot air and wedge RF/laser polymetric sealing machine
(8) Weatherometer
(9) Automatic thickness gauze
(10) Puncture resistance
(11) Twisting Machines
(12) Material Handling system for Twisting Machines
(13) Data capture system for Twisting Machines
(14) Balancing Equipment for Cable Corder Spindle Motors
(15) Shuttle-less looms
(16) Reeds for weaving machines
(17) Warp defects detection system
(18) Parts for Airjet weaving machines
(19) Parts for projectile weaving machines
(20) Parts for Rapier weaving machines
(21) Warp knotting system
(22) Take up system for weaving machine
(23) Creels for weaving machines
(24) Package change system for creels
(25) Process control equipment namely, Tension meters, On-line denier checking system, On-line twist checking system, On-line EDS monitoring system, Filamentation detector, Fluff Detector, Automatic Fabric Inspection System, Tacho-meters
(26) Storage and Transport systems namely, Automated fabric transport system and Automated fabric packing system
(27) Finishing Machines namely, Dipping Machine for Tyre Cord/industrial Fabrics, Coating Machines, Dipping Machine for beting duck, Stenter for Technical Textiles, Embossing Rollers, Parts and Accessories for Dip and coating units, Hydraulic Control for Accumulator, Dynamic Braking for Pull Rolls System, De-webber system, Burners with Controllers
(28) Testing equipment, namely, Tensile Tester, Thermal Shrinkage Tester, Twist Tester, Fatigue Tester

(D) Woollen machinery items, namely:-
 

(1) Automatic Hopper Feeder
(2) Greasy Wool Opener
(3) Tow-to-Top Converter
(4) Automatic/Semi-Automatic Pump Press
(5) Ring frame with 50 mm Ring or below PLC/Computer controlled
(6) PLC/ Computer Controller Assembly Winding machine
(7) PLC/ Computer controlled Two- for Twister/Three-for-one Twister
(8) Twisting /covering machine for Lycra Yarn
(9) Automatic cleaning machine for Heald, Reeds and drop wires.
(10) Electric/ Electronic/ motorized beam trolley with Harness lifting arrangement.
(11) Open Width scouring machine/Rope scouring machine
(12) Damping unit for fabric conditioning
(13) Automatic Weft straightener
(14) Shearing machine
(15) Continuous crabbing machine
(16) Wollen ring frame
(17) Fibre/Yarn/Fabric testing equipment namely, Fineness meter, Evenness Tester, Light Fastness Tester, Strength Tester, Length Measurement Tester, Crease Recovery Tester, Projection Microscope, Pilling and Abrasion Tester, Colour Comparator for instant observation of matched shades, Yarn friction and Hairiness meter and Seam Slippage Tester.
(18) Rag tearing machine
(19) Fibre opening and blending machine
(20) Self Acting spinning frame
(21) Raising machine

(E) Machinery for use with shuttleless looms, namely, electronic dobby and jacquard.
(F) Machinery for manufacture of denim fabrics, namely:-
 

(1) Sand blasting or brushing machine
(2) Washing machine falling under tariff item 8450 20 00

(G) Machinery for manufacture of non-wovens textiles, namely:-
 

(1) Complete production lines for the production of following non-wovens, up to rolled goods preparation and packing, namely:
 

(a) Needle punched non-wovens
(b) Chemically bonded non-wovens
(c) Thermally bonded non-wovens
(d) Stitch bond non-wovens
(e) Spun laced (hydro entangled) non-wovens
(f) Spun bonded non-wovens
(g) Melt blown non-wovens
(h) Spun bond melt blown (SMS) non-wovens


(2) Machinery for finishing of all non-wovens
(3) Machinery for converting non-wovens into made-ups

(H) Other machinery for use in textiles industry, namely:-
 

(1)Spandex/elastane yarn attachment on ring frame for manufacturing core spun yarn
(2) Single end warping machine
(3) Single end sizing machine
(4) Reaching-in machine
(5) Humidification plant

1. Scramblers
2. Descramblers
3. Encoders
4. Decoders
5. Jammers
6. Network firewalls
7. Network sniffers, scanners and monitoring systems
8. Probes for data monitoring
9. SMS and MMS monitoring systems

 

1. DC motors [maximum power kW/rpm-5.8 kW (S2 rating/3900)];
2. DC series motor of capacity 5.46 kW;
3. Separately excited DC traction motor of capacity 20 HP;
4. Electronic MOSFET sepex controller;
5. DC brushless battery fan;
6. Contactor (battery voltage to electronic chopper controller)” ;
 

I. Ginning And Pressing Machinery

1 Sawgins or double roller gins with auto feeder.
2 Pre-cleaner
3 Lint cleaner
4 Mechanical/pneumatic conveyer system for carrying kapas
5 Mechanical/Pneumatic conveyer system for carrying lint
6 Bale press
7 Conveyer system for seeds
8 Humidifier/moisturizer
9 Fire Fighting System
10 HVI for Cotton testing

II. Spinning Preparatory and Spinning Machinery

1 High speed combers capable of running upto 400 nips per minute
2 High speed lap formers (comber preparatory machine) capable of running upto 100 MPM with/without automatic grain adjuster and parts and accessories thereof.
3 High Production draw-frame with delivery speed upto 800 meters/minute with autoleveller
4 Speed frame with less than 1500 r.p.m. with inbuilt stretch control
5 Blow room line for processing man made fibres and cotton with automatic bale plucker with production capacity of 1500 to 2000 kg per hour.

III. Weaving Preparatory and Weaving Machinery
1 Plain loom and automatic loom with shuttle insertion
2 Rapier shuttleless loom with insertion rate upto 700 meter per minute.

IV. Garmenting Machinery

1 Industrial sewing machines with less than 3000 stitches per minute
2 Garment washing machines
3 Tumblers
4 Hydro extractors
5 Steam iron tables
6 Fabric inspection machine

(List 48 & 49 has been inserted vide CUS NTF NO. 11/2005 DATE 01/03/2005)

[F.No 334/1/2002-TRU]

 

(T.R.Rustagi)
Joint Secretary to the Government of India