DGFT PUBLIC NOTICE NO. 45(RE-2001)/1997-2002 Dated 1.11.2001
New/ Amendm,ents in Standard Input Output Norms (SION)

1. Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-2779, the new entries at Sl.No.A-2780 to A-2789 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1699, the new entries at Sl.No.C-1700 to C-1710 shall be added as per Annexure ”C” to this Public Notice.

FOOD PRODUCTS

After the existing entry at Sl.No. E-104, the new entry at Sl.No.E-105 shall be added as per Annexure ”D” to this Public Notice.

5. This issues in public interest.

Annexure “A” to the Public Notice No. 45 Dated: 01/11/2001

AMENDMENTS/CORRECTIONS

Sl.

No.

Page

No.

Reference

Amendments/Corrections

Chemicals & Allied Products

Sl.No.A591

The description of import item at Sl. No. 1, shall be corrected (without any change in quantity) to read as under:-

“Picramic Acid/ Sodium Picramate”.

162

Chemicals & Allied Products

Sl.No.A1260

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A1260

Beta Phenyl Ethyl Amine

1 kg

1. Benzyl Cyanide

i) Benzyl Chloride

ii) Sodium Cyanide

2. Isopropyl Alcohol

3. Methanol

4. Neckel Catalyst

1.200 kg

1.504 kg

0.582 kg

0.400 kg

0.033 kg

0.012 kg

169

Chemicals & Allied Products

Sl.No.A1360

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A1360

Hexamethyl Disilazane

1 kg

1. a) Hexa Methyl

Disiloxane

b) Residual Polymer

Mixture/Volatile

Cyclic Mixture

1.49 kg

0.878 kg

containing approx.

95% Silicone content

b) Dimethyl Dichloro

Silane

1.a)Trimethyl Chloro-

silane (TMCS)

b)Toluene

c) Ammonia Gas

1.309 kg

1.50 kg

0.10 kg

0.35 kg

186

Chemicals & Allied Products

Sl.No.A1539

The description of import item at Sl. No.3 shall be amended (without any change in quantity) to read as under:-

“3. Meta Cresol/Meta Para Cresol”

187

Chemicals & Allied Products

Sl.No.A1544

1. The description of export item shall be amended to read as under:-

“Soya Long Oil Alkyd of 62% Oil length with Solid content 70 + 2% and MTO 30 + 2%”

2. After the import item at Sl. No. 4, the following additional import item (with quantity) shall be added:-

“5. Mineral Turpentine - 31.5 kgs”

Oil (MTO)

198

Chemicals & Allied Products

Sl.No.A1614

After the import item at Sl. No. 1 against this entry, the following alternative item (with quantity) shall be added:-

“OR

Liquid Bromine - 1.548 kg ”

240

Chemicals & Allied Products

Sl.No.A1790

After the description of import item at Sl. No.8, the following item (with quantity) shall be added:-

“9. Furnace Oil - 0.8127 Litre”

248

Chemicals & Allied Products

Sl.No.A1843

1. After the import item at Sl. No. 5 the following additional import item (with quantity) shall be added:-

“6. Furnace Oil - As per Note 2 below”

2. The existing Note below this norm shall be read as Note 1 and after that the following Note shall be added:-

“Note: 2.The item No. 6 may be allowed @ 0.546 Ltr./kg of Polyester Texturised Yarn and @ 0.182 Ltr./kg of POY”

Chemicals & Allied Products

Sl.No.A2090 (as amended vide Public Notice No. 38 Dated: 01/11/2000)

The quantity of import item at Sl. No. 4 ( i.e. Triethyl Amine) shall be amended to read as under:-

“0.012 kg”

10.

285

Chemicals & Allied Products

Sl.No.A2124

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2124

Zeolite (Sodium Alumina Silicate)

1 kg

1. Sodium Silicate

i) Silica Sand

ii) Soda Ash

2. Aluminium Hydroxide

3. Caustic Soda Flakes

0.481 kg

0.340 kg

0.220 kg

0.480 kg

0.090 kg

11.

293

Chemicals & Allied Products

Sl.No.A2197

After the description of import item at Sl. No.3, the following item (with quantity) shall be added:-

“4. Furnace Oil - 0.682 kg”

12.

Chemicals & Allied Products

Sl.No.A2469 (as amended vide Public Notice No. 32 Dated: 01/09/2000)

The description of export item shall be corrected to read as under:-

“N-Ethyl 3-Carbomyl 4-Methyl – 6 Hydroxy – 2 Pyridone”

13.

Chemicals & Allied Products

Sl.No.A2501 (as amended vide Public Notice No.42 Dated: 01/12/2000)

The existing Note at the end of this entry shall be substituted by the following:-

“Note: In case of different percentage of solution, the quantity of all the inputs may be allowed on pro-rata basis based on the percentage of import content in the export product”

14.

Chemicals & Allied Products

Sl.No.A2534 (as amended vide Public Notice No.53 Dated: 01/02/2001)

The description of import items at Sl. Nos. 3, 4, & 6 shall be corrected (without any change in quantities) to read as under:-

“3. Epoxydised Soyabean Oil

4. PVC Stabilizer

6. Calcium Carbonate”

15.

Chemicals & Allied Products

Sl.No.A2674 (as amended vide Public Notice No. 15 Dated: 01/06/2001)

The quantity of import item at Sl. No. 4 shall be corrected to read as under:-

“2.434 kgs.”

16.

Chemicals & Allied Products

Sl.No.A2713 (As amended vide Public Notice No. 24 Dated: 02/07/2001

1. The quantity of import item at Sl. No. 10 (i.e. Nylon Fabric for Tyres of relevant GSM) shall be amended to read as under:-

“11 kgs”

2. At the end of this norm the following Note shall be added:-

“Note: The weight of each Tyre shall not be more than 580 gms + 2%”

17.

Chemicals & Allied Products

Sl.No.A2742 (As amended vide Public Notice No. 35 Dated: 03/09/2001

The description of export item shall be corrected to read as under:-

“Sodium 2 Ethyl Hexyl Sulfate (Active Matter 40 + 2%)”

18.

393

Electronics Products

Sl.No.B-134

The description of export item shall be amended to read as under:-

“Quartz Analogue Wrist Watch Movement (including CKD/SKD thereof)”

19.

463-464

Engineering Products

Sl.No.C253

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C253

Plated Wires (Single/Stranded)

a) of Copper

b) of Copper Clad/Coated Steel

c) of Copper Alloy

1 kg

1. Base Metal

a) Copper Cathode/ Wire Bar/ C C Rod/Wire

b) Copper Clad/ Coated Steel Wire

c) Copper Alloy Wire/ Cathode/ Wire Bar/C C road/Wire

2. Silver 99.9% purity (Ingot, Granuels, Plates or Powder)

3. Wire Drawings Dies, Drawing Lubricants Welding Dies, Tin, Nickel, S-Nickel, Electroplating Salts, Plating Additives

1.0 kg

0.025 kg

2% of the FOB value of export

4. Plastic Bobbins, Plastic Spools, Protective paper / film

As per Packing Policy

Note: 1. Export product may have Silver, Nickel or Tin Plating on it, but Silver will be allowed only if the export product has Silver plating on it.

Note: 2. Import of base Metal in 1 a), b) or c) will be allowed depending on the base metal used in export product a) or b) or c).

20.

479

Engineering Product

Sl.No.C297

The description of export item shall be amended to read as under:-

“Stamping (Stator & Rotor sets) for electric Motors”

21.

606

Engineering Product

Sl.No.C826

The description of export item shall be amended to read as under:-

“Stainless Steel Kitchen Sinks”

22.

609

Engineering Products

Sl.No.C844

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C844

Steel Cops/ Pirn/Bobbin

1 kg

1. Hot finished Carbone Steel Seamless Tubes/ Pipes

2. ABS Granuals / resin

3. CRCA Steel Sheet/ Strips

1.33 kg/kg content in export

1.05 kg/kg content in export

1.15 kg/kg content in export

23.

621-622

Engineering Products

Sl.No.C923 to C926

At the end of each of these norms the following Note shall be added:-

“Note: This norm shall also be applicable to exports made in “Cloth Roll” form.”

24.

642

Engineering Products

Sl.No.C-980

After the description of import item at Sl. No. 4 the following additional import item (with quantity) shall be added:-

“5. Atomised Iron Powder - 0.135 kg.”

25.

Engineering Products

Sl.No.C-1343 (as amended vide Public Notice No. 9 Dated: 01/05/2000)

The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-

“1. Cold Rolled Mild Steel Strips/ Coils/

Sheets”

26.

734

Engineering Products

Sl.No.C-1392

1. The description of import item at Sl. No. 1 & 3 shall respectively be amended (without any change in quantity) to read as under:-

“1.Continuous cast copper Rod/

cathodes/wire bars (EC Grade)

3. XLPE compound/Cross Linkable LDPE

Compound”

2. After the import item at Sl. No. 4(c) the following additional import item at Sl. No. (d) (with quantity) shall be added:-

“d). Filler material (Calcium - 0.31 kg

Carbonate / Alumina /

Kolin)”

27.

Engineering Products

Sl.No.C-1614 (as amended vide Public Notice No. 04 Dated: 31/03/2001)

The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-

“1. Cold Rolled Mild Steel Strips/ Coils/

Sheets”

28.

Engineering Products

Sl.No.C1669 (as amended vide Public Notice No. 24 Dated: 02/07/2001)

The description of import item at Sl. No. 3 shall be corrected (without any change in quantity) to read as under:-

“3. Polypropylene Granules”

29.

Engineering Products

Sl.No.C1671 (as amended vide Public Notice No. 24 Dated: 02/07/2001)

The description of export item shall be corrected to read as under:-

“Heat recovery Wheel (1 No. : Heat recovery Wheel incorporating Rotor of 1 Cubic Metre Volume having 1.9 mm flute height)”

30.

21-22

Engineering Products

Sl.No.C1685 (as amended vide Public Notice No. 30 Dated: 01/08/2001)

1. The description of import items at Sl. Nos.4,5,6,10,11,14,16,18,20,21,22, & 23 shall respectively be corrected (without any change in quantity) to read as under:-

“4. Fly Wheel

5. Carbon Steel of relevant grade

6. AG Break Motor

10. Bearing Case

11. Spherical Roller Bearing

14. Surge Tank

16. Front GIB Plate Right Hand

18. GIB Plate Rod

20. Gear End Plate

21. Cylinder

22. Worm Wheel

23. Dual Solenoid Valve”

31.

9-10

Plastic Products

Sl.No.H-129 (As amended vide Public Notice No. 32 Dated: 01/09/2000)

The description of import items at Sl. No. 7, 8 & 9 shall respectively be amended (without any change in quantity) to read as under:-

“7. i)Neocryl XK 70 (Modified Acrylic/

Styrene Co-polymer Emulsion)

ii)Poligen MV 250/ Syntran MV 250

(Aqueous, Metal-cross- linked Styrene-

acrylate Copolymer Dispersion)

8. i) Poligen WE 1 (Polyethylene based Wax

Emulsion)

9. i) Surfinol 104H (Surfactant) (2,4,7,9

Tetramethyl 5 Decyn-4, 7-Diol)

(Tetramethyl Decyndiol)

ii) Fluorade FC-129 (Surfactant)

(Potassium Fluoroalkyl Carboxylate)

iii) Rewopol SBDO 75 (Sodium Di-isooctyl

Sulfosuccinate)”

32.

10-11

Plastic Products

Sl.No.H-130 (As amended vide Public Notice No. 32 Dated: 01/09/2000)

The description of import items at Sl. No. 7, 8 & 9 shall respectively be amended (without any change in quantity) to read as under:-

“7. i)Neocryl XK 70 (Modified Acrylic/

Styrene Co-polymer Emulsion)

ii)Poligen MV 250/ Syntran MV 250

(Aqueous, Metal-cross- linked Styrene-

acrylate Copolymer Dispersion)

8. i) Poligen WE 1 (Polyethylene based Wax

Emulsion)

9. i) Surfinol 104H (Surfactant) (2,4,7,9

Tetramethyl 5 Decyn-4, 7-Diol)

(Tetramethyl Decyndiol)

ii) Fluorade FC-129 (Surfactant)

(Potassium Fluoroalkyl Carboxylate)

iii) Rewopol SBDO 75 (Sodium Di-isooctyl

Sulfosuccinate)”

33.

934-35

Plastic Products

Sl.No.H-367

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-367

Nylon-6/ Nylon-66 Monofilament Yarn wound on Disposable Bobbins

1 kg

1. Relevant Nylon-6/ Nylon-66 Chips

2. Antioxidant

3. Finish Oil

1.05 kg/kg content in the export product

0.002 kg

0.001 kg

4. Surface Active Agent

5. Polypropylene Granules for Bobbins

0.001 kg

1.05 kg/kg content in the export product

Note: 1. Only the relevant grade of Nylon Chips as contained in the export product shall be allowed.

Note: 2. When export is not on Bobbins, Polypropylene Granules shall not be allowed for import.

34.

Plastic Products

Sl.No.H-439 (incorporated vide Public Notice No. 15 Dated: 01/06/2001)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H439

Aluminum Metalised BOPP Film

1 kg

1. BOPP Film

Polypropylene Resin/

Granules

1.10 kg

1.32 kg

2. Aluminium Wire

3. Induction/ Evaporation Boats

0.0246 kg

0.007 kg

35.

956

Textile Products

Sl.No.J-4

After the description of import item at Sl. No. 2 the following additional import items (with quantities) shall be added:-

“3. Lubricating agent - 0.05 kg/kg

(50%

Concentration)

4. Cone centres - net to net

basis

36.

Textile Products

Sl.No.J-92 (as amended vide Public Notice No. 30 Dated: 01/08/2001)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

J-92

Cotton fabric – dyed with/without elaston/lycra/ spandex yarn

1 kg

1. Cotton Yarn

Raw cotton for carded

counts of yarn of 40s

& below

Raw cotton for

combed counts of

yarn of 40s and below

Raw cotton for

combed counts of

yarn of above 40s

2. Polyvinyl Alcohol (PVA) Sizing Material

3. Sodium Hydrosulphite

4. Vat/reactive sulphur/ pigment dyes (100% strength)

5. Elaston/ lycra/ spandex yarn

1.10 kg

1.225 kg/kg content in the export product

1.289 kg/kg content in the export product

1.325 kg /kg content in the export product

0.01 kg

0.02 kg

0.015 kg

1.05 kg/kg of materials content in the export product

Stretch yarn (mixed

yarn containing 95%

cotton and 5% of

elaston/ lycra/ spandex

yarn)

6. Fuel for power generation -

Naphtha

Furnace Oil

1.05 kg/kg of materials content in the export product

5.50 kg

4.10 ltrs

Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition.

Note:2. The above norm for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil.

37.

Textile Products

Sl.No.J-96 (as amended vide Public Notice No. 40 Dated: 01/10/2001)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

J96

Cotton indigo blue dyed denim cloth with/ without elaston /lycra/ spandex yarn

1. Raw Cotton

Cotton Yarn

2. Vat Indigo Blue Dye

3. Polyvinyl Alcohol

4. Sodium Hydrosulphite

5. Caustic Soda Flakes

1.24 kg/kg content in export

1.04 kg/kg content in export

0.05 kg

0.03 kg

0.02 kg

6. Elaston/ lycra/ spandex

yarn

Stretch yarn (mixed

yarn containing 95%

cotton and 5% of

elaston/ lycra/ spandex

yarn)

7. Polyacrylic Synthetic sizing agent

8. Sulfoesterifiedamide starch/ modified starch

9. Fuel for power generation -

Naphtha

Furnace Oil

1.05 kg/kg of materials content in the export product

0.016 kg

0.044 kg

1.22 kg

0.92 litres

Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition.

38.

1014

Textile Products

Sl.No.J-308

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

J-308

Cotton yarn dyed fabrics/made-ups with/without elaston/ lycra/ spandex yarn

1 kg

1. Cotton Yarn

2. Polyvinyl Alcohol (PVA) Sizing Materials

3. Sodium Hydro Sulphite

4. Vat/reactive/ sulphur/ pigment dyes (100% strength)

1.10 kg

0.01 kg

0.02 kg

0.015 kg

5. Elaston/ lycra/ spandex yarn

Stretch yarn (mixed

yarn containing 95%

cotton and 5% of

elaston/ lycra/ spandex

yarn)

6. Fuel for power generation -

Naphtha

Furnace Oil

1.05 kg/kg of materials content in the export product

5.50 kg

4.10 litres

Note: 1. Naphtha and Furnace Oil shall be allowed only under AU condition.

Note: 2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have a captive power plant using “Naphtha/Furnace Oil” as fuel.

Annexure “B” to the Public Notice No. 45Dated: 01/11/2001

CHEMICALS AND ALLIED PRODUCTS

Sl.No.		Export Item		Qty.	Import Item	Qty. Allowed
	A2780	Ametryn Technical 98% Minimum	1 kg		1. Cyanuric Chloride 2. Isopropyl Amine (70%) 3. Mono Ethyl Amine (70%) 4. Toluene 5. Thiourea 6. Dimethyl Sulphate 7. Sodium Hydroxide	0.900 kg 0.412 kg 0.314 kg 0.245 kg 0.630 kg 0.548 kg 1.174 kg
	A2781	Cetyl/ Hexadecyl Trimethyl Ammonium Chloride (25% by weight)	1 kg		1. Dimethyl Palmityl Amine	0.222 kg
	A2782	Polyethylene Glycol 300	1 kg		1. Diethylene Glycol 2. Potassium Hydroxide 3. Acetic Acid	0.346 kg 0.001 kg 0.001 kg
	A2783	Anisyl Acetone	1 kg		1. Phenol	1.80 kg
	A2784	Sodium Phenoxy Acetate	1 kg		1. Phenol 2. Sodium Bicarbonate 3. Caustic Soda 4. Mono Chloro Acetic Acid 5. Soda Ash	0.749 kg 0.508 kg 0.350 kg 0.818 kg 0.519 kg

	A2785	Sultamicillin Tosylate	1 kg	1. 6-APA 2. Ampicillin Trihydrate BP93 3. Potassium Permanganate 4. 2-Ethyl Hexanoic Acid 5. Methyl Aceto Acetate 6. Isopropyl Alcohol 7. Methylene Chloride 8. Di-Methyl Formamide	2.35 kg 0.96 kg 4.70 kg 1.02 kg 0.70 kg 3.94 kg 3.76 kg 1.18 kg
	A2786	Potassium Persulfate	1 kg	1. Potassium Sulfate	0.710 kg
	A2787	2, 4-Dimethyl-3- Pentyloxy Phthalo dinitrile (Alkoxy-Dinitrile)	1 kg	1. 2,4 Dimethyl 3 Pentanol 2. Sodium hydride (60% dispersion in Paraffin wax) 3. Tetra Hydro Furan	0.738 kg 0.254 kg 0.748 Litre
A2788		1,1 Dimethyl-3-Hydroxy-Butyl Peroxy Neo-Heptanoate	1 kg	1. Hexylene Glycol 2. Neo Heptanoyl Chloride 3. Hydrogen Peroxide 50% 4. Odourless mineral spirit	0.336 kg 0.354 kg 0.197 kg 0.435 kg
A2789		Lead Stearate Based PVC Stabilizer	1 kg	1. Lead Ingots 2. Stearic Acid 3. Relevant Wax	0.287 kg 0.742 kg Net to net
Note: The above norms are on 100% Lead Stearate basis. For formulated product containing Lead Streate of different percentage, the requirement of inputs may be worked out on pro-rata basis.

Annexure “C” to the Public Notice No. 45 Dated: 01/11/2001

ENGINEERING PRODUCTS

Sl.No.

Export Item

Qty.

Import Item

Qty Allowed

C1700

SRM-9000, (Radio Frequency Assembly)

1 No

1. Integrated Circuits (IC)

2. Capacitor:

(i) Ceramic

(ii) Polyfilm

(iii) Tantalum

3. Shieldtray

4. Shield Cover

5. PCBs

6. Connectors

7. Transistors

8. Diodes

9. Resistors (Film)

10. Inductors (Coil)

11. Transformers

12. Thermister

13. Solder Paste

2600 Nos.

32294 Nos.

900 Nos.

4300 Nos.

100 Nos.

100400 Nos.

100 Nos.

7100 Nos.

4400 Nos.

42000 Nos.

6895 Nos.

100 Nos.

2.30 kg.

C1701

Ferro Calcium Cored Wire (Calcium Ferro wire) – Powder Specification to be indicated by the applicant

1 MT of powder content

1. Calcium Metal Granules

2. Iron Powder

1.02 kg/kg content calcium in the export product

1.015 kg/kg content of Iron in the export product

C1702	Silver Alloyed Contacts (containing silver more than 50% and other alloying metals)	1 kg	1. Un-wrought silver having purity more than 99.95% 2. Any other relevant alloying metal	1.03 kg/kg content of silver in the export product 1.03 kg/kg content of relevant alloying metal in the export product
C1703	Lacquered Electrolytic Tin Plate Sheet	1 kg	1. Eletrolytic Prime Quality Tinplate of relevant thickness 2. Relevant Lacquer	1 kg 0.01 kg
C1704	Copper Clad/ Coated Steel Wire: Single or stranded having single wire less than 0.5 mm dia	1 kg	1. Copper Clad/ coated Steel wire more than 1 mm diameter 2. Wire Drawing Dies, Drawing Lubricants welding Dies 3. Plastic Bobbins, Plastic Spools, protecting paper/films	1.02 kg 2% of the FOB value of export As per packing policy
C1705	1.Resistance Wire: single or stranded or wound on Fibre Glass Core having single wire less than 0.5 mm, using a) Copper Nickel Alloy(s) Or	1 kg	1. (a) Copper Nickel Alloy Wire 1.00 mm or more diameter or (b) Nickel Chromium Alloy Wire 1.00 mm or more diameter	1.00 kg 1.00 kg

	b)Nickel Chromium Alloy(s)		2. Alloy Master batches/ Wire Drawings Dies/ Welding Dies Glass Fibre Yarn 3. Plastic Bobbins, Plastic Spools, Protective Paper/ film, Drawing Lubricants	2% of the FOB value of export As per Packing Policy
Note: Import of Alloy in 1 (a) or (b) will be allowed depending on the alloy used in export product (a) or (b)
C1706	Pump set with AC SQ Induction Motor	1 set	1. AC SQ Induction motor of relevant wattage & speed	1 No.
C1707	AA Alkaline Battery (24 gms)	1 No.	1. Electrolytic Manganese Dioxide 2. Zinc Powder 3. Potassium Hydroxide Flakes 4. Zinc Oxide Powder 5. Crystalline Graphite Powder/ Synthetic/ Natural Graphite 6. Gallant Powder/ Galling Agent I & II 7. Indium Acetate Powder 8. Sealent/Asphati Piton C/A&P/T 9. Surfactant 10. Paper for Laminated Non-woven Separator / (Main & Bottom)	10.34 gms 4.12 gms 1.6 gms 0.07 gm 0.628 gm 0.043 gm 0.0024 gm 0.04 gm 0.0002 gm 0.172 gm

11. Nickel Plated Steel Cane

Non Alloy Steel Sheet

12. Tin Plated Brass Wire/ Conductor

13. Nylon/Plastic Top

14. Re-inforcing Support Ring

Non Alloy Steel Sheet

15. Negative Steel Cap

Non Alloy Steel Sheet

16. PVC Shrink Foil/ Shrink Sleeve

17. PVC Label

Self-Adhesive PVC

Sheet for Label

18. Duplex Board for Packing

19. Carbon Coating/ Carbon Paste

20. NS Clean}

21. Press Oil }

1 No.

5.9 gms

0.43 gm

1 No.

1.26 gms

1 No.

0.42 gms

As per packing policy

1 No.

4.2 sq.inch.

As per packing Policy

0.026 gms

{1% of FOB {if non alloy {steel sheet {for cap, can {& ring are {imported.

C1708

Cooling Tower complete including in completely knocked down condition, with or without accessories and other parts

1 No. (weight alongwith contents of various inputs to be indicated)

1. Isopthalic Polyester Resin

2. Glass Roving/ chopped strand mat/surface mat/ woven rovings

3. Polypropylene

4. PVC Fill Sheet

The following inputs

with their quantity for

making 1 kg of PVC

fill sheet:-

a. PVC Resin (Suspension Grade)

b. Titanium Dioxide

c. Processing Aid

630 gm/kg GRP Component content in the export product

420 gm/kg GRP component content in the export product

1.05 kg/kg polypropylene component content in the export product

1.05 kg/kg PVC fill sheet component content in the export product

0.945 kg

0.060 kg

0.011 kg

d. Impact Modifier

e. Paraffin Wax

f. Calcium Citrate

g. Lubricant/ Heat Stabiliser

h. Filler (Calcium Carbonate)

i. Carbon Black

5. Relevant Bearings

0.014 kg

0.005 kg

0.003 kg

0.038 kg

0.021 kg

0.002 kg

Net to net basis with accountability clause

C1709

Suspension Hanger made of stainless steel wire- Grade AISI 302

1 kg

1. Stainless Steel wire Rods – Grade AISI 302

1.02 kg/kg content in the export product

C1710

Polyesterimide Enamelled copper Wire/Strip

1 kg

1. Copper wire Rod / cathodes

2. Polyestermide enamel

1.01 kg/kg content in the export product

Annexure “D” to the Public Notice No. 45 Dated: 01/11/2001

FOOD PRODUCTS

Sl.No.

Export Item

Qty.

Import Item

Qty Allowed

E105

Pan Masala

1 kg

1. Betal Nut

2. Catechu

3. Natural Essential Oil

4. Saffron

5. Cardamom

740 gms.

90 gms.

15 gms

01 gm

15 gms