Public Notice No. 49(RE-2001)/1997-2002 date the 1st January, 2001
Input-Output Norms Further Added/Amended

Attention is invited to paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol. 1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol. 2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/correction at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl. No. A-2515, the new entries from Sl. No. A-2516 to A-2525 shall be added as per Annexure "B" to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl. No. C-1577, the new entries from Sl. No. C-1578 to C-1582 shall be added as per Annexure "C" to this Public Notice.

FOOD PRODUCTS

After the existing entry at Sl. No. E-89, the new entries Sl. No. E-90 to E-93 shall be added as per Annexure "D" to this Public Notice.

PLASTIC PRODUCTS

After the existing entry at Sl. No. H-434, the new entry Sl. No. H435 shall be added as per Annexure "E" to this Public Notice.

5. This issues in public interest.

Sd/-                        
(N. L. Lakhanpal)
Director General of Foreign Trade

Annexure "A"

AMENDMENTS/CORRECTIONS

Sl.
No.

Page No.

Reference

Amendments/Corrections

1

2

3

4

1.

18-19

Chemicals & Allied Product
Sl. No. A79

The description of export item shall be amended to read as under:-
"Atenolol BP/USP"

2.

32.-33

Chemicals & Allied Products
Sl. No. A163

The description of import item at Sl. No. 15 (with quantity) shall be amended to read as under:-
"15          Phosphorus         –              0.700 kg                Trichloride
                     OR 
                Yellow/White         –              0.16 kg"                Phosphorus

3.

170

Chemical & Allied Products
Sl. No. A1371

The quantity of import item at Sl. No. 1 shall be amended to read as under:-
"1.580 kg"

4.

288

Chemicals & Allied Products
Sl. No. A2150

The norms covered by this entry shall be substituted by the following:-

Sl. No.

Export Item

Qty.

Import Item

Qty. Allowed

A2150

Dimethyl Amino Ethyl Chloride Hydrochloride

1 kg

1.             Dimethyl Amino
                Ethanol
2.             Thionyl Chloride
3.             Ethylene Dichloride

0.687 kg

0.913 kg
0.50 kg

5.

294

Chemicals & Allied Products
Sl. No. A2205

1.          The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-

                "Bleached Soft Wood Pulp"

2.          The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:

                "4. 0.079 kg
                5. 0.007 kg".

6.

295

Chemicals & Allied Products
Sl. No. A2206

1.          The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-

"Bleached Soft Wood Pulp"

2.      The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:-
"4. 0.103 kg
5. 0.009 kg".

7.

295

Chemicals & Allied Products
Sl. No. A2207

1.          The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-

"Bleached Soft Wood Pulp"

2.      The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:-
"4. 0.055 kg
5. 0.005 kg".

8.

295 - 296

Chemicals & Allied Products
Sl. No. A2208

1.          The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:
"Bleached Soft Wood Pulp"

2.      The quantity of import item Nos. at Sl. 4 & 5 shall be amended to read as under:-
"4. 0.071 kg
5. 0.006 kg".

9.

10

Electronics Products
Sl. No. B-131 Introduced Vide Public Notice No. 38
Dated 01/11/2000

The Note below this entry shall be deleted.

10.

601

Engineering Product
Sl. No. C791

The description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:-
"1.     Stainless Steel          –              2.0 MT          Bars/Billets/Blooms".

11.

813-815

Leather Products
Sl. No. G-3

After the Note No. 1 the following Note shall be added below this norm:-

"Note2:-     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and leather products', finished leather required per pair is (i) 2.95 sq. ft. if item at sl. No. 1 (a) & (b) are not asked for, (ii) 2.65 sq. ft. per pair if item at sl. no. 1(a) is not asked for, (iii) 1.7 sq. ft. per pair if item at sl. no. 1(b) is not asked for and (iv) 1.4 sq. ft. per pair if item at sl. no. 1(a) & 1 (b) are not asked for".

12.

816

Leather Products
Sl. No. G-6

The following Note No. 1 shall be added below this norm:-

"Note 1:     The average consumption of finished leather for ladies hand gloves will be 2 sq. ft./pair and that of gents 2.5 sq. ft./pair."

13.

819-820

Leather products
Sl. No. G-8

The following Note No. 1 shall be added
 below this norm:-

"Note1 :     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products',  finished leather required per pair is (i) 8 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 7.5 sq. ft. if item 1(a) is not asked for, (iii) 4.5 sq. ft. if item 1(b) is not asked for, and (iv) 4.00 sq. ft. if 1(a) & (b) is asked for."

14.

820-822

Leather Products
Sl. No. G-9

After the Note No. 1 the following Note shall be added below this norm:-

"Note 2:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per pair is (i) 8 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 7.5 sq. ft. if item 1(a) is not asked for, (iii) 4.5 sq. ft. if item 1(b) is not asked for, and (iv) 4.00 sq. ft. if 1(a) & (b) is asked for."

15.

822-823

Leather Products
Sl. No. G-10

After Note No. 1 the following Note shall be added below this norm:-

"Note 2:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per pair is (i) 10 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 9.5 sq. ft. if item 1(a) is not asked for, (iii) 5.5 sq. ft. if item 1(b) is not asked for, and (iv) 5.00 sq. ft. if 1(a) & (b) is asked for."

16.

824

Leather Products
Sl. No. G-11

The following Note No. 1 shall be added below this norm:-

"Note 1:-    Requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', shall be worked out taking into account the area of Finished Leather as 1.5 Sq. ft. pair of Gents Leather Sandle Upper."

17.

824-825

Leather Products
Sl. No. G-12

After the Note No. 2 the following Note shall be added below this norm:-

"Note 3:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required is 1.5 sq. ft. per pair."

18.

825-826

Leather Products
Sl. No. G-13

The following Note 1 shall be added below this norm:-

"Note 1:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per pair is (i) 4.25 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq. ft. if item 1(a) is not asked for, (iii) 2.5 sq. ft. if item 1(b) is not asked for, and (iv) 2.00 sq. ft. if 1(a) & (b) is asked for."

19.

826-828

Leather Products
Sl No. G-14

After the Note No. 1 the following Note shall be added below this norm:-

"Note 2:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per pair is (i) 4.25 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq. ft. if item 1(a) is not asked for, (iii) 2.5 sq. ft. if item 1(b) is not asked for, and (i) 2.00 sq. ft. if 1(a) & (b) is asked for."

20.

828-829

Leather Products
Sl. No. G-15

The following Note No. 1 shall be added below this norm:-

"Note 1:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per pair is (i)10 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 9.5 sq. ft. if item 1(a) is not asked for, (iii) 5.5 sq. ft. if item 1(b) is not asked for, and (iv) 5.00 sq. ft. 1(a) & (b) is asked for."

21.

831-832

Leather Products
Sl. No. G-22

The following Note No. 1 shall be added below this norm:

"Note 1:-    For requirem of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per pair is (i) 3.65 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 3.25 sq. ft. if item 1(b) is not asked for, (iii) 2.15 sq. ft. if item 1(c) not asked for, and (iv) 1.75 sq. ft. if 1(a) & (c) are asked for."

22.

840-841

Leather Products
Sl.No.G-29

The following Note No. 1 shall be added below this norm:-

"Note 1:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per pair is (i) 9.4 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9 sq.ft. if item 1(a) is not asked for, (iii) 5.15 sq.ft. if item 1(b) is not asked for, and (iv) 4.75 sq.ft if 1(a) & (b) are asked for.".

23.

844

Leather Products Sl.No.G-35

The following Note No. 1 shall be added below this norm:-

"Note 1:     For requirement of processing Chemicals as per Note 7 under the `General Notes for Leather and Leather Products', finished leather required per glove is 1.2 sq.ft.".

24.

943

Plastic Product     Sl.No.H-410

The description of export item shall be amended to read as under:-
"PVC Lace Table Mats/Coasters/Doileys".

25.

17

Miscellaneous Product                Sl.No.K-126 vide Public Notice No. 19 dated 03/07/2000

The norm covered by this entry shall be deleted from Miscellaneous Product Group and this entry has been shifted to Food Products Group with prior import condition.

Annexure "B"

Chemicals and Allied Products

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2516

Metoclopramide HCL BP

1 kg

1.      Meta Amino Phenol

1.73 kg

2..     Potassium Carbonate

3.21 kg

3.      N,N, Diethyl Ethylene Diamine

0.51 kg

4.      Dimethyl Formamide

0.49 kg

A2517

Triclosan Oral Grade conforming to the following specifications:-
2,3,7,8  Tetra  Chloro Dibenzofuran<1ppt,  2,3,7,8  Tetra  Chloro
Dibenzo-p-dioxin<1ppt,    2,4,4'    Trichloro-2-Nitro    Diphenyl
Ether<0.01%, 2,4,4" Trichloro-2-Amino Diphenyl Ether<0.01%

1 kg

1.             2,4 Dichloro Phenol

3.00 kg

 

2.             Perchloro Ethylene

10.00 kg

 

3.             Sodium Nitrite

0.63 kg

 

4.             Isopropyl Alcohol

5.00 kg

A2518

Fenvalerate 20% EC

1 kg

1.      Fenvalerate Tech. 90%

0.227 kg

2.             Solvent C-9

0.688 kg

A2519

Prepared  adhesives based on Plastics (Two  component  Laminating Adhesives)

A.          Adhesive (Polyurethane solution containing 60% resin  content  and 40% solvent)




B.      Additive  (Poly  Isocyanate solution containing 50% solid and 50% solvent)






1 kg





1 kg

1.
2.
3.

4.
5.
6.

7.


1.
2.
3.

4.
5.
6.

7.

Adipic Acid
Isophthalic Acid
Mono Ethylene  Glycol
Diethylene  Glycol
1,6-Hexane Diol  Toluene  Di-iso-cyanate
Ethyl  acetate/ methyl  Ethyl  Ketone  (relevant)
Adipic  Acid   Isophthalic Acid
Mono Ethylene Glycol   
Diethylene Glycol
1,6-Hexane  Diol
Toluene  Di-iso-cyanate
Ethyl acetate/ methyl
Ethyl Ketone (relevant)

0.094 kg
0.270  kg
0.050  kg

0.204   kg
0.016  kg
0.035  kg              

0.400  kg              


0.012 kg
0.037 kg
0.032  kg

0.060  kg
0.002 kg
0.372 kg

0.500 kg

A2520

Prepared  adhesives based on Plastics (Two components  Laminating Adhesives)

A. Adhesive (Polyurethane solution containing 66% resin  content  and 34% solvent)





B. Additive  (Poly  Isocyanate solution containing 50% solid and 50% solvent)




1 kg   







1 kg

1.
2.
3.

4.
5.
6.

7.


1.
2.
3.

4.
5.
6.

7.

Adipic  Acid
Isophthalic Acid
Mono  Ethylene  Glycol
Diethylene  Glycol
1,6-Hexane Diol  Toluene  Di-iso-cyanate
Ethyl acetate/ methyl  Ethyl  Ketone  (relevant)
Adipic  Acid   Isophthalic Acid
Mono Ethylene Glycol
Diethylene Glycol
1,6-Hexane  Diol
Toluene  Di-iso-cyanate
Ethyl  acetate/ methyl Ethyl Ketone (relevant)

0.103 kg
0.297 kg
0.055 kg

0.224 kg
0.018 kg
0.038 kg

0.340 kg


0.012 kg
0.037 kg
0.032 kg

0.060 kg
0.002 kg
0.372 kg

0.500 kg

A2521

Prepared  adhesives based on Plastics (Two components  Laminating Adhesives)

A. Adhesive (Polyurethane solution containing 25% resin  content  and 75% solvent)





B.  Additive  (Poly  Isocyanate solution containing 50% solid and 50% solvent)




1 kg







1 kg

1.
2.
3.

4.
5.
6.

7.


1.
2.
3.

4.
5.
6.

7.

Adipic  Acid
Isophthalic Acid
Mono Ethylene  Glycol
Diethylene  Glycol
1,6-Hexane Diol
Toluene  Di-iso-cyanate
Ethyl  acetate/methyl  Ethyl  Ketone  (relevant)
Adipic  Acid   Isophthalic Acid
Mono Ethylene Glycol
Diethylene Glycol
1,6-Hexane  Diol
Toluene  Di-iso-cyanate
Ethyl  acetate/methyl Ethyl Ketone (relevant)

0.039 kg
0.113 kg
0.021 kg

0.085 kg
0.007 kg
0.015 kg

0.750 kg


0.012 kg
0.037 kg
0.032 kg

0.060 kg
0.002 kg
0.372 kg

0.500 kg

A2522

Paranitro benzyl bromide, 99% min. purity

1 kg

1.      Paranitrotoluene

1.300 kg

2.      Liquid Bromine

1.300 kg

3.      Carbon Tetrachloride

0.900 kg

4.      Methanol

1 kg

A2523

Nylon Tyre Yarn (Nylon-6)

1 MT

1.      Nylon Chips (Nylon-6)

1.078 MT

2.      Spin Finish Oil

32.25 kg

3.      Cuprous Iodide

0.44 kg

 

 

 

4.      Tetra Methyl Thiuram Disulphide (TT)

0.107 kg

A2524

Ethyl 2, Methyl 3, 4 Penta dianoate

1 kg

1.      Tri-ethyl orth propionate

1.782 kg

2.             Propargyl Alcohol

0.549 kg

A2525

PVC Shower curtains

1 kg

1.             Relevant PVC Film

1.06 kg/kg content in the export product

Annexure "C"

Engineering Products

C1578

Fire Clay Bricks/Shapes

1 MT

1.      Calcined Clay

0.752 MT

2.      Non-Plastic Clay

0.220 MT

3.      Ball Clay

0.055 MT

4.      SRM-30 (Calcined Alumina)

0.035 MT

C1579

Iron Nickel Alloy wire of different composition

1 kg

1.             Nickel Pellets

1.03 kg/kg of Nickel in the export product

C1580

Nickel Chrome Alloy wire of different composition

1 kg

1.             Nickel Pellets

1.03  kg/kg of the Nickel in the export product

2.     Electrolytic Chromium Metal Flake

1.03 kg/kg content in the export product

C1581

Nickel Copper Alloy wire of different composition

1 kg

1.             Nickel Pellets

1.03 kg/kg of Nickel in the export product

2.             Copper Ingot

1.03 kg/kg of Copper in the export product

C1582

High  Speed Steel broaches (cutting tools), Cobalt  &  Non-Cobalt grade

1 kg

1.      Relevant High Speed Steel (Cobalt/Non-Cobalt grade)

1.45 kg/kg content in the export product

 

Annexure "D"

Food Products

E90

Processed Black Pepper (Non-Srilankan) (with minimum 2%  volatile oil content)

1 MT

1.      Unprocessed  Black Pepper (non-Srilankan) with extraneous  matter less than 2% and minimum 2% volatile oil content.

1.02 MT

 

Note:          Export  of  this  item shall be permitted only  after  import  of unprocessed Black Pepper of said specification.

 

 

 

 

 

E91

Hand made Beedies

1 carton

1.             Relevant Cartons

Net +1% wastage

E92

Ground Nut Kernels

1 kg

1.             Raw Jute

1.05 kg/kg content in the export product packaging

 

 

2.      Relevant LDPE/HDPE/PP Granules

1.05 kg/kg content in the export product packaging

E93

Natural Sesame Seeds

1 kg

1.      Raw Jute

1.05 kg/kg content in the export product packaging

2.      Relevant LDPE/HDPE/PP Granules

1.05 kg/kg content in the export product packaging

           

 

Annexure "E"

Plastic Products

H435

Epoxite Novalac Resin Powder (Softening Point - 110+5oC

1 MT

1.             Bisphenol - A

0.91 MT