Public Notice No. 12(RE-2001)/1997-2002 dated 01/06/2000
Duty Exemption Scheme- Standard Input-Output Norms Added/Modified

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraph 7.8 and 7.10 of the Handbook of Procedures, Vol. 1, 1997-2002, as amended and also to the Handbook of Procedures, Vol. 2, 1997-2002, as amended from time to time.

2.   In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol. 2, 1997-2002, as amended.

3.   In the statement of Standard Input Output Norms as contained in the Handbook of Procedures. Vol. 2, 1997-2002, as amended, amendments/corrections at appropriate places as mentioned in Annexure "A" to the Public Notice shall be made.

4.   In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-2428, the new entries from Sl.No. A-2429 to A2438 shall be added as per Annexure "B" to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No. C-1530, the new entries from Sl.No. C-1531 to C-1537 shall be added as per Annexure "C" to this Public Notice.

5.  This issues in Public interest.

Sd/-     
(N.L. Lakhanpal)
Director General of Foreign Trade

Issued by:
Government of India
Ministry of Commerce, New Delhi

(Issued from File No. 01/85/44/19/AM2001/DES-VI)

 

Annexure "A"

AMENDMENTS/CORRECTIONS

Sl. No.

Page No.

Reference

Amendments/Corrections

1

2

3

4

1.

174

Chemicals & Allied Products Sl.No. A1412

The norms covered by this entry shall be substituted by the following:-

 

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A1412

N(1,3 Dimethyl Butyl) N Phenyl-Para Phenylene Diamine (Minimum 95%)

1 kg

1.    Aniline

2.    MIBK (Methyl Isobutyl Ketone)

3.    Para Nitro Chloro Benzene

4.    Formic Acit (85%)

5.    Potassium Carbonate

6.    Platinum Catalyst

0.463 kg

0.444 kg

0.761 kg

0.354 kg

0.459 kg

0.0002 kg

 

2.

306

Chemicals & Allied Products
Sl.No. A2299

The description of import item Sl.No. 1 shall be amended to read as under:-
“L-Glutamine and without Sodium Bicarbonate.”

 

3.

307

Chemicals & Allied Products
Sl.No. A2301

The quantity of export item shall be corrected to read as under :-
"10,000 Vials"

 

4.

438

Engineering Products
Sl.No. C169

After import item No. 7, the following item (with quantity) shall be added :-

8.    Aluminium Sheet/CRCA Sheet (for Blades of Fan) (only The relevant item used in the export to be allowed)

  -   1.05 kg/kg content in the export product”.

 

5.

589

Engineering Products
Sl.No. C697

After import item No. 1, the following alternative item (with quantity) shall be added:-
                                             “OR

Aluminium Wire
(Not below 3mm)

  -   36.255 kg.”

 

6.

589

Engineering Products
Sl.No. C698

After import item No. 1, the following alternative item (with quantity) shall be added:-
                                             “OR

Aluminium Wire
(Not below 3mm)

  -   5.999 kg.”

7.

607

Engineering Products
Sl.No. C829

1.  The description of import item No. 1 (with quantity) shall be amended to read as under:-

  “1.    C.R.S.S. Strip             - 988 kgs.
                                     OR
          H.R.S.S. Strip             - 1522 kgs.”

2.  At the end of this entry the following Note shall be added:-

Note :- “In so far as H.R.S.S. is concerned, the input norm as above shall be valid for a period of one year viz. Upto 31.3.2001 only after which it shall be reviewed”.

 

 

 

615

Engineering Products
Sl.No. C876

1.    Import item No. 5 alongwith quantity shall be deleted.

2.    After import item No. 4 the following items (with quantity) shall be added :-

“5.   Polyox WSRN 750                       -       44 kg.

6.     Polyox Coagulant                        -       44 kg.

7.     General purpose Polystyrene   -       38 kg.”

3.    The note below this norm shall be amended to read as under:-

Note :- “1.  The items at S.No. 5, 6 and 7 above shall be allowed only if the product exported is with Lubra strip".

 

9.

712

Engineering Products
Sl.No. C1315

The description of import item No. 1 (without any change in quantity) shall be amended to read as under :-

“Inco’s’ Nickel Rounds/Pellets Unwrought & Unalloyed.”

 

10.

757

Engineering Products
Sl.No. C1503

The description of import item No. 1 (alongwith quantity) shall be amended to read as under:-

“1.   Copper concentrate            -         1.06 MT/MT of copper content in the export product

OR

Copper Scrap                       -         1.075 MT/MT Copper content
in the export product

Blister                                    -         1.04 MT/MT copper content
in the export product.”

 

11.

805

Food Products
Sl.No. E51

After import item No. 3 the following items (with quantity) shall be added:-

“4    Kraft Paper                            -       Net+1% wastage

5.     Adhesive (Powder form)    -       0.005 gm (approx.)

6.     Printing Ink                            -       0.00005 gm.”

 

12.

830 - 831

Leather Products
Sl. No. G18

1.    After import item No. 7, the following item (with quantity) shall be added:-

“8.  Leather Chemicals    -       As per Leather Chemicals prescribed in G-7, on pro-rata Basis”.

2.        At the end of this entry the following footnote shall be added:-

“Note: 2.    For import of Leather Chemicals (Item No. 8) the requirement of Finished Leather per number of Glove is 0.50 sq. ft.”.

 

13.

873

Plastic Products
Sl. No. H-90

After import item No. 1 the following additional item with quantity shall be added:-

“2.  Trigonox 101 (2,5 Bistert-           -     0.007 kg/kg”
butylperoty-2,5-dimethyl
hexane, minimum 92% in solvent)

14.

951

Sports Goods
Sl.No. I-23

1.  The description of export item (without change in quantity) shall be amended to read as under:-

“Head Guard made out of PVC/PU leather cloth”

2.  The description of import item (without change in quantity) shall be amended to read as under:-

“Relevant PVC/PU Leather Cloth.

15.

1

GENERAL NOTES FOR ALL EXPORT PRODUCTS GROUP

“In the general notes, note No. 4 shall deleted”.

       

 

Annexure "B"

Chemicals and Allied Products

Sl.
No.

 

Export Item

 

Qty.

 

Import Item

 

Qty. Allowed

 

A2429

 

Tris Nonyl Phenyl Phosphite

 

1 kg

 

1.     Nonyl Phenol

2.     Phosphorous Trichloride

1.066 kg

0.222 kg

A2430

 

Cis-2-(2,4-Dichlorophenyl)-2-(1-H-Imidazole-1,-yl-methyl-1, 3-Dioxolan-4-yl) methyl-P-Tolyl sulphonate
       OR
Cis-Tosylate

1 kg

 

1.        2,4 Dichloro Acetophenone

2.     Imidazole

3.     Toluene

4.     Methanol

5.     Methyl Isobutyl Ketone

 

3.07 kg

1.38 kg

6.41 kg

9.08 kg

0.74 kg

 

A2431

 

Cyanoacetamide

 

1 kg

 

1.             Monochloro Acetic Acid

2.             Sodium Cyanide

3.             Acetone

4.             Methyl Isobutyl Ketone

 

3.75 kg

1.36 kg

1.75 kg

1.36 kg

 

A2432

 

Reactive polyamide Resin with Free Amino Groups and Viscosity at 25 oC 125 to 175 poises (SYNPOL-140)

 

1 kg

 

1.             Domer Acid

2.             Triethylene Tetramine

3.    Industrial Mono Carboxylic Fatty Acid

 

0.684 kg

0.443 kg

0.029 kg

 

A2433

 

Reactive Polyamide Resin with High Amine value (340-400) Long Pot Life and Viscosity at 25 oC 2 to 6 poises (SYNPOL-160)

1 kg

 

1.    Industrial Monocarboxylic Fatty Acid

2.    Triethylene Tetramine

 

0.600 kg

0.440 kg

 

A2434

Slow Curing Solvent free aromatic polyamine Epoxy adduct (Epoxy Resin harder-340)
Viscosity – 50-90 poises
Pot Life – 8-10 hrs.

1 kg.

1.             Aniline
2.             Epoxy Resin   
3.             Dibutyl Phthalate

 

0.470 kg

0.384 kg

0.360 kg

 

A2435

Fast Curing Solvent free aromatic polyamine Epoxy adduct (Epoxy Resin hardner-(350)
Viscosity – 150-210 poises
Pot Life – 20-30 minutes

1 kg

1.             Aniline
2.             Epoxy Resin   
3.             Dibutyl Phthalate

 

0.442 kg

0.146 kg

0.338 kg

 

A2436

 

Polyvinyl Butyral Resin

 

1 kg

1.             Poly Vinyl Alcohol

2.             N-Butyraldehyde

 

0.710 kg

0.429 kg

 

A2437

BOPP Bags with/without Adhesives Tape

1 kg

1.       BOPP Film (relevant thickness      and grade)

 

 

2.    Double side self adhesive Tape

 

1.02            kg/kg content in the exp.prod.

1.02 sq.mtr./
sq. mtr. content in the export product

Note:-

The item No. 2 viz. Double side self-adhesive Tape shall be permitted for import only when the product is exported with adhesive tape.


 

A2438

Reactive Polyamide Resin with High Amine Value (380-420) Rapid curing and Viscosity at 25.oC  10 to 15 poises (SYNPOL-150)

1 kg

1.       Domer Acid

2.       Triethylene Tetramine

3.       Industrial Mono-carboxylic Fatty Acid

 

0.236 kg

0.431 kg

0.389 kg

 

Annexure `C’

ENGINEERING PRODUCTS

S.NO.

Export Item

Qty.

Import Item

Qty.
Allowed

C1531

Pneumatic Tools -Hand Drills without Muffler with chuck ¾” x 3 ¾” (19mm x 95.2mm)

1 No.

1.             Relevant Inlet Bushing

2.             Relevant Hose Tail

3.             Relevant Throttle Lever

4.             Relevant Real Value Seat

5.             Relevant Front Valve Seat

6.             Relevant Valve

7.             Relevant Handle bare

8.      Relevant Throttle Valve Bushing

9.             Relevant Bolt

10.          Relevant Pawl

11.          Relevant Ratchet Ring

12.          Relevant Cylinder

13.          Relevant Piston

14.          Relevant Cylinder Bushing

15.          Relevant Retainer Plate

16.          Relevant Chuck

17.          Relevant chuck sleeve

18.          Relevant Front Head

19.          Relevant Plunger Shifter

20.          Relevant Shifter Sleeve

21.          Relevant Retainer Sleeve

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.


2 Nos.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

Note:-

The import of components shall be allowed on net to net basis with accountability clause.

C1532

Pneumatic Tools-Hand Drills with Muffler and shifter sleeve with chuck ¾” x 3 ¾” (19mm x 95.2 mm)

1 No.

1.             Relevant Inlet bushing

2.             Relevant Hose Tail

3.             Relevant Throttle Lever

4.             Relevant Real Value Seat

5.             Relevant Front Valve Seat

6.             Relevant Valve

7.             Relevant Handle bare

8.      Relevant Throttle Valve Busing

9.             Relevant Bolt

10.          Relevant Pawl

11.          Relevant Ratchet Ring

12.          Relevant Cylinder

13.          Relevant Piston

14.          Relevant Cylinder Bushing

15.          Relevant Retainer Sleeve

16.        Relevant Retainer Plate

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.


2 Nos.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 

 

 

 

 

 

 

17.          Relevant Chuck

18.          Relevant chuck sleeve

19.          Relevant Front Head

20.          Relevant Muffler

21.          Relevant Plug Muffler

22.  Relevant Button Rotation Release

23.          Relevant Washer Clamping

24.          Relevant Plunger Shifter

25.          relevant Shifter Sleeve

26.          relevant Depth Gauge

27.          relevant Dead Handle

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

 

1 No.

1 No.

1 No.

1 No.

1 No.

Note:

The import of components shall be allowed on net to net basis with accountability clause.

C1533

Pneumatic Tool Concrete Vibrator with 2 ½” Head

1 No.

1.             Relevant Live Air Handle Cap

2.             Relevant Plug Handle

3.       Relevant Live Air Handle cover

4.             Relevant Sleeve

5.             Relevant Hose Nipple

6.             Relevant `Bank-It’ Clamp

7.             Relevant Intake Hose

8.             Relevant Shell & Nose Cap

9.             Relevant End Cap

10     Relevant Eccentric Shaft Nut Assembly

11.          Relevant Upper end Plate

12.          Relevant Eccentric Weight

13.          Relevant Eccentric Shaft

14.          Relevant Lower end Plate

15.    Relevant Hose Clamp (Band-It)

16.          Relevant Swivel Nipple

17.          Relevant Lock wire

18.  Relevant Hose Clamp (Band-It)

19.          Relevant Hose Nipple

20.    Relevant Exhaust Swivel Collar

21.          Relevant Live air hose

22.          Relevant Strainer

23.          Relevant Oiler body

24.    Relevant Live air handle stem & bushing

25.          Relevant Exhaust Hose

1 No.

1 No.

1 No.

 

1 No.

2 Nos.

2 Nos.

1 No.

1 No.

1 No.

2 Nos.

 

1 No.

1 No.

1 No.

1 No.

3 Nos.

 

1 No.

1 No.

2 Nos.

 

1 No.

1 No.

 

1 No.

1 No.

1 No.

1 No.

 

1 No.

Note :

The import of components shall be allowed on net to net basis with accountability clause.

 

C1534

Pneumatic Tool

1 No.

1.             Relevant Value

2.             Relevant Retainer

3.             Relevant Piston

4.             Relevant Spring

5.       Relevant Cylinder

6.       Relevant Clamp

7.       Relevant Muffler

8.       Relevant  Muffler Plug

9.       Relevant Housing

10.    Relevant Pin

11.          Relevant Air Tube

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

2 Nos.

1 No.

 

 

 

 

12.          Relevant Bushing

13.          Relevant Shaft

14.          Relevant  Button

15.          Relevant Bush

16.          Relevant Bearing

17.          Relevant Sleeve

18.          Relevant Casting

19.          Relevant Chain Link Lead

20.          Relevant throttle Valve

21.          Relevant Handle

2 Nos.

1 No.

1 No.

1 No.

2 Nos.

1 No.

1 No.

1 No.

1 No.

1 No.

Note  :-

The import of components shall be allowed on net to  net basis with accountability clause.

C1535

Pneumatic Tool Rock Drill

1 No.

1.    Relevant Handle Bracket (made of steel Gr. SAE 8620)

2.    Relevant Handle Bolt (made of steel Gr. EN 9)

3.     Relevant Air inlet swivel (made of steel Gr. EN 24)

4.     Relevant Air inlet swivel nut (made of steel Gr. SAE 8620)

5.    Relevant Blower Valve (made of steel Gr. SAE 8620)

6.    Relevant Thru Bolt (made of steel Gr. EN 24)

7.    Relevant Front head (made of steel Gr. SAE 8620)

8.    Relevant Retainer (made of steel Gr. SAE 8620)

9.     Relevant Retainer trunnion (made of steel Gr. SAE 8620)

10.  Relevant Cylinder (made of steel Gr. SAE 8620)

11.    Relevant Back head (made of steel Gr. SAE 8620)

12.  Relevant Throttle value handle (made of steel Gr. SAE 8620)

13.  Relevant Ratchet ring (made of steel Gr. SAE 8620)

14.  Relevant Valve case (made of steel Gr. EN 354)

15.  Relevant Bolower value bushing (made of steel Gr. SAE 8620)

16.  Relevant Rifle bar nut (Bronze) (made of steel Gr. SAE 8620)

17.  Relevant Piston (made of steel Gr. EN 355)

18.  Relevant Bushing Cylinder (made of steel Gr. SAE 8620)

19.    Relevant Air tube (made of steel Gr. SAE 8620)

20.  Relevant Chuck rotation nut (made of steel brass)

21.  Relevant Chuck Sleeve (made of steel Gr. SAE 8620)

22.  Relevant Chuck (made of steel Gr. SAE 8620)

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

2 Nos.

 

1 No.

 

1 No.

 

2 Nos.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

 

1 No.

 

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

 

 

 

23.  Relevant Rifle bar (made of steel Gr. SAE 8620)

24.  Relevant Valve (made of steel Gr. SAE 8620)

25.  Relevant Valve Guide Bushing (made of steel Gr. SAE 8620)

26.  Relevant Bushing-water valve (made of steel Brass)

27.  Relevant Throttle Valve (made of steel Gr. SAE 8620).

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

Note:-

The import of components shall be allowed on net to net basis with accountability clause.

C1536

Pneumatic Tool-Rivetting Cutter (buster) 8" to 11" Cylinder

1 No.

1.    Relevant Throttle valve (made of steel Gr. SAE 8620)

2.    Relevant Throttle tube (made of steel Gr. ENIA)

3.     Relevant Throttle lever (made of steel Gr. EN8)

4.    Relevant Valve case lid (made of steel Gr. SAE8620)

5.       Relevant Valve (made of steel Gr. EN24)

6.    Relevant Valve case (made of steel Gr. SAE8620)

7.    Relevant handle (made of steel Gr. EN8)

8.    Relevant Spring clip (Lock collar) (made of steel Gr. EN8)

9.    Relevant Lock collar (made of steel Gr. EN8)

10.  Relevant Cylinder (made of steel Gr. EN24)

11.  Relevant Piston (made of steel Gr. T118 CR2)

12.  Relevant Lower sleeve (made of steel Gr. EN31)

13.  Relevant Upper sleeve (made of steel Gr. EN31)

14.  Relevant Retainer sleeve (made of steel Gr. EN24)

15.  Relevant Exhaust Deflector (made of steel Gr. SAE1070)

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

1 No.

 

Note:-

The import of components shall be allowed on net to net basis with accountability clause.

C1537

Regulators with rotating outlet for LPG cylinder

1 No. (227 gms)

1. Zinc

245 gms.